glo8al
Junior Member
Posts: 95
|
Post by glo8al on Jun 13, 2007 16:46:11 GMT 7
Does Failover require 802.3ad standard? I know Link Aggregation needs 802.3ad, but not sure for Failover. Anyone know for sure? Well I tried on a normal switch, with only one cable and both cables connected. Email notification stopped working as soon as I selected Failover. Using the INFO module I can see the even on the INFO page it doesn't know what the IP etc in of either interface, it just says UNKNOWN on both WAN and LAN. With Failover disable, email works, and INFO Module knows the IP etc of the used port. Can you give me follw setting: 1.WAN and LAN setting? if you have ssh module, please give me under setting: 2.ifconfig message 3.ping your email server when failover is enable. 4.route message 5.cat /app/etc/hosts 6.cat /app/etc/resolv.conf I haven't had the time to do any more on this, I am running firmware 1.0.11.1 atm, which has solved the LCD from going blank, and unresponsive. Also I have to read up on doing ssh (never done it before) so google here I come. (any handy sites on this?) Thx for the help.
|
|
chris
New Member
Posts: 1
|
Post by chris on Jun 14, 2007 17:49:17 GMT 7
Any one has this problem whit uploading the sshd.bin after upgrading to 1.00.10? Thanks Chris
|
|
|
Post by peterfu on Jun 14, 2007 19:06:13 GMT 7
Any one has this problem whit uploading the sshd.bin after upgrading to 1.00.10? You are trying to load a "Pseudo module" which was designed for firmware version prior to 1.00.06.5. These "Pseudo modules" are using the firmware upgrade mechanism. You have to take a newer version of the module which is designed for usage with the module management which was introduced in FW 1.00.06.5 - these modules have the extention .mod. If You have installed these "Pseudo moduules" and not deinstalled them before upgrading, You must also apply the RENMOD batch (it is described very well in the Thecus Wiki) br Peter
|
|
|
Post by ranger on Jun 16, 2007 13:57:32 GMT 7
My configuration: N5200 , 5 Samsung spinpoint 500GB running in RAID5 Windows Vista Ultimate Firmware 1.00.10 Everything worked fine with the 1.00.10 firmware for a week until I selected the option to enable CIFS caching in the services menu. After this the system needs a reboot but it ended up with the problem that I can't use the unit anymore. The problems: The LCD displays says WAN N/A The LCD management and all other functions don't work. In other words wahtever I do nothing goes. The LCD display says Link Aggr: The hard reset doesn't work. I can't access the Web Admin interface I can't connect network drives In other words I'm stuck. I can however ping the default address at 192.168.1.100 no there seems to be network connectivity. I allready asked some people to send me the reset file and instructions to go back to the factory default by the USB method. If someone can help me out , please. IMPORTANT UPDATEI am an idiot, I searched this forum last night until three in the morning and found no files for this USB trick. This evening after one minute I saw this thecususergroup.proboards106.com/index.cgi?board=n5200firmware&action=display&thread=1174853425To modify this file I downloaded winvi32 which also can open and save unix style files. Again a wise lesson , go to bed ;D
|
|
|
Post by realitybytez on Jun 20, 2007 0:20:47 GMT 7
just wondering - does anyone know why this release is still not posted at the thecus site? they're still showing 1.00.08 as the latest release.
|
|
|
Post by spiken on Jun 20, 2007 1:50:21 GMT 7
Same thing for the n2100 and it's 2.1.06 firmware : no release note.
|
|
|
Post by taurec on Jun 28, 2007 13:21:07 GMT 7
THX Kevin.. i will download 11.3 now .. on monday after the users are back i can tell you what happend. It worked for 13 Days... but now every User who want to connec is getting a "Worng Passwort" message..even on the Web-Interface.. also i can't connect with the ssh-module anymore.. a reboot doesn't help... d**n.
|
|
|
Post by peterfu on Jun 29, 2007 2:46:04 GMT 7
THX Kevin.. i will download 11.3 now .. on monday after the users are back i can tell you what happend. It worked for 13 Days... but now every User who want to connec is getting a "Worng Passwort" message..even on the Web-Interface.. also i can't connect with the ssh-module anymore.. a reboot doesn't help... d**n. I had the "wrong password" the last two upgrades to 1.00.08 and then to 1.00.10 - however it was possible to connect via ssh. I was not able to figure out the problem, so my solution was to delete every user and then create them again (in FW 1.00.10 I used the batch import from a file with the user list). After user import I had to set all the ACL's again. I'm still on 1.00.10. br Peter
|
|
|
Post by taurec on Jun 29, 2007 3:58:46 GMT 7
After every Update i always started from the beginning with no Useres added and no Raid. Everytime the Useres are Imported with the Batch-Function and the ACLs are made with a little AutoIT-Script.
|
|
|
Post by facekhan on Jul 22, 2007 21:30:39 GMT 7
I just tried to install this firmware and it gave me a firmware upgrade failed message and the folders page would not appear.
I attempted to restore to factory defaults but when I rebooted the defaults seem to be gone and there are no network ip address on the LCD's
The RAID still reads healthy so I hope my data is still there.
What is a good way to get this thing back on the lan so I can check my data.
|
|