|
Post by polson on Jun 6, 2007 12:48:34 GMT 7
[/li][li] Access rights have disappeared, it was possible to login, but no access to folders. The only way to fix it was deleting the users, reenter them and assigne the access rigths again (had this also after the upgrade to 1.00.08) [/quote] I'm having this Problem with new devices. They have 1.00.09. After i fixed the useres the way you do some days later they have the same problem again :-( I have tryed this on two Devices.. always the same error. We have 140 Users addet and every User has a own Folder (Homedir). I was told that some ppl are running the N5200 with 400 Users but Thecus tells us only 65 are supported :-( What now?[/quote] I don't understand your question?? please tell me your step for this case.
|
|
|
Post by polson on Jun 6, 2007 12:55:34 GMT 7
My settings are SMTP Server mail.iinet.net.au Port 25 Auth Type login SMTP Account ID <<myaccount>> Account Password << mypasswd>> Confirm Account Password <<mypasswd>> Sender email <<myaccount@iinet.net.au>> Receivers' E-Mail Address <<another email address of mine>> Works fine with Failover off, doesn't work with Failover on. (well for me anyway) Hi ! Your setting looks like no problem. so i want to know how do you link your wan port and lan port. use same switch or use two switch for this case??
|
|
|
Post by taurec on Jun 6, 2007 15:58:04 GMT 7
I'm having this Problem with new devices. They have 1.00.09. After i fixed the useres the way you do some days later they have the same problem again :-( I have tryed this on two Devices.. always the same error. We have 140 Users addet and every User has a own Folder (Homedir). I was told that some ppl are running the N5200 with 400 Users but Thecus tells us only 65 are supported :-( What now? I don't understand your question?? please tell me your step for this case. Hi Polson, well i have two questions: 1. Have somebody a solution for the problem with the dissapearing ACLs 2. It it true that only 65 Useres are possible (at our first contact someone told us that 400 Users are no probleme. Thats why be purchased 10 devices) i'm going to try the new Firmware now.
|
|
glo8al
Junior Member
Posts: 95
|
Post by glo8al on Jun 6, 2007 16:12:41 GMT 7
We I got a switch which supported 802.3ad so both cables connect to the switch.
|
|
|
Post by polson on Jun 7, 2007 9:51:29 GMT 7
I don't understand your question?? please tell me your step for this case. Hi Polson, well i have two questions: 1. Have somebody a solution for the problem with the dissapearing ACLs 2. It it true that only 65 Useres are possible (at our first contact someone told us that 400 Users are no probleme. Thats why be purchased 10 devices) i'm going to try the new Firmware now. Please give me which page told you "only 65 useres are possible"?? because i didn't see this message in my machine.
|
|
|
Post by polson on Jun 7, 2007 9:53:16 GMT 7
We I got a switch which supported 802.3ad so both cables connect to the switch. Hi !! please use the normal switch(not supported 802.3ad)for test again. because my switch not support 802.3ad. can you test and feedback the some message for me . ths
|
|
|
Post by taurec on Jun 7, 2007 13:18:35 GMT 7
Please give me which page told you "only 65 useres are possible"?? because i didn't see this message in my machine. No Page.. the Hotline told us.
|
|
glo8al
Junior Member
Posts: 95
|
Post by glo8al on Jun 7, 2007 17:31:22 GMT 7
We I got a switch which supported 802.3ad so both cables connect to the switch. Hi !! please use the normal switch(not supported 802.3ad)for test again. because my switch not support 802.3ad. can you test and feedback the some message for me . ths Does Failover require 802.3ad standard? I know Link Aggregation needs 802.3ad, but not sure for Failover. Anyone know for sure? Well I tried on a normal switch, with only one cable and both cables connected. Email notification stopped working as soon as I selected Failover. Using the INFO module I can see the even on the INFO page it doesn't know what the IP etc in of either interface, it just says UNKNOWN on both WAN and LAN. With Failover disable, email works, and INFO Module knows the IP etc of the used port.
|
|
|
Post by polson on Jun 8, 2007 10:44:02 GMT 7
Hi !! please use the normal switch(not supported 802.3ad)for test again. because my switch not support 802.3ad. can you test and feedback the some message for me . ths Does Failover require 802.3ad standard? I know Link Aggregation needs 802.3ad, but not sure for Failover. Anyone know for sure? Well I tried on a normal switch, with only one cable and both cables connected. Email notification stopped working as soon as I selected Failover. Using the INFO module I can see the even on the INFO page it doesn't know what the IP etc in of either interface, it just says UNKNOWN on both WAN and LAN. With Failover disable, email works, and INFO Module knows the IP etc of the used port. Can you give me follw setting: 1.WAN and LAN setting? if you have ssh module, please give me under setting: 2.ifconfig message 3.ping your email server when failover is enable. 4.route message 5.cat /app/etc/hosts 6.cat /app/etc/resolv.conf
|
|
|
Post by polson on Jun 8, 2007 10:52:12 GMT 7
Please give me which page told you "only 65 useres are possible"?? because i didn't see this message in my machine. No Page.. the Hotline told us. I didn't found your case in my N5200 but I found user limit is 300 no 65,so you can try to add more than 65 user, if not add more than 65 user, you can write the message in this site.
|
|
|
Post by taurec on Jun 8, 2007 11:06:22 GMT 7
I didn't found your case in my N5200 but I found user limit is 300 no 65,so you can try to add more than 65 user, if not add more than 65 user, you can write the message in this site. It was the German Hotline *g I indeed can add more then 65 Users. I have 140 Useres at one device. But some Users can not connect to the NAS through Samba/CIFS (but the Webinterface is working for them). Or if they can connect they can't write because they get an error message saying the drive is write protected. But the ACLs in the Webinterface are correct. I told this case the German Hotline and they told me this is because i have more then 65 Users/Connections on the device :-(
|
|
|
Post by kevincy on Jun 8, 2007 19:31:15 GMT 7
I didn't found your case in my N5200 but I found user limit is 300 no 65,so you can try to add more than 65 user, if not add more than 65 user, you can write the message in this site. It was the German Hotline *g I indeed can add more then 65 Users. I have 140 Useres at one device. But some Users can not connect to the NAS through Samba/CIFS (but the Webinterface is working for them). Or if they can connect they can't write because they get an error message saying the drive is write protected. But the ACLs in the Webinterface are correct. I told this case the German Hotline and they told me this is because i have more then 65 Users/Connections on the device :-( Hi, Do you have use quota to manage your folder?
|
|
|
Post by taurec on Jun 8, 2007 19:38:28 GMT 7
Yes... 10 Gigabyte each User.. and non off them has more then 4 GB in his Folder.
|
|
|
Post by kevincy on Jun 9, 2007 8:33:01 GMT 7
Yes... 10 Gigabyte each User.. and non off them has more then 4 GB in his Folder. Nice , Your problem maybe bond in Quota. You can try 1.00.11.3 maybe this firmware could solve your problem. For my test , older quota is not stable ,it will happen system be block like your problem. And thecus 1.00.11 have focus on quota problem fix.
|
|
|
Post by taurec on Jun 9, 2007 18:41:16 GMT 7
THX Kevin.. i will download 11.3 now .. on monday after the users are back i can tell you what happend.
|
|