|
|
Post by getmythe on Jan 25, 2008 5:55:48 GMT 7
A couple of updates, some minor, some major  - FIREFLY 1.3.00 (new firefly server)
- META 2.3.03 (gui cosmetics only)
- UTILS 1.1.00 (showmount added)
- RTORRENT 1.1.02 (improved editor)
- SSH 4.0.00 (reworked doumentation)
All of them are compatible with fw 2.1.06 (I finally took the plunge, too). Feedback is more than welcome especially in case you may find bugs. have fun, getmythe |
|
wengi
Full Member
Posts: 102
|
Post by wengi on Jan 25, 2008 19:21:48 GMT 7
Only one feedback: Thanks for your work  wengi |
|
|
|
Post by majority on Jan 25, 2008 19:51:07 GMT 7
Ooo, awesome UTILS module. Now I can use nano instead of vi. Life has become a little easier. ;D
majority.
|
|
ferg
Full Member
Posts: 119
|
Post by ferg on Jan 28, 2008 5:42:07 GMT 7
Just one question.... for all of those modules that a currently installed on the n2100 do i need to uninstall them before installing the new ones or if i attempt to install the new ones will they just update the old ones?
thanks again getmythe
|
|
|
|
Post by baddude on Feb 8, 2008 16:13:37 GMT 7
hi
i upgraded firefly to N2100-FIREFLY-1.4.00., but it won't start.
do i have do something different, like before?
no webadmin, no process in "top".
is there any log i can check?
thx.
|
|
|
|
Post by getmythe on Feb 8, 2008 17:12:44 GMT 7
I assume you are aware that FIREFLY requires UTILS  |
|
|
|
Post by baddude on Feb 8, 2008 17:43:09 GMT 7
[Thecus]UTILS 1.2.00 Unix shell only tool collection Yes
i got that, enabled, but nothing :S
|
|
|
|
Post by baddude on Feb 8, 2008 18:30:22 GMT 7
i managed to start it from ssh
media:/raid/module/cfg/module.rc# sh FIREFLY.rc start
like this.
|
|
|
|
Post by getmythe on Feb 8, 2008 18:47:56 GMT 7
Does it start when you (re-)boot your box? Did you see any warning messages when starting from the shell? I'm using FIREFLY 1.4.00 on a regular basis and have not seen any problems sofar. There should be several processes called mt-daapd.
|
|
|
|
Post by baddude on Feb 8, 2008 20:49:05 GMT 7
how i did: installed firefly reboot not work, no processes installed utils not work uninstalled firefly installed firefly not work ( to tell the true, it seems to work for about 10 sec, i could go into the admin, but after clicking on config page, it has gone again ) started manually now rebooted, and it works after reboot thank you for you patient for a n00b  |
|
|
|
Post by getmythe on Feb 9, 2008 0:24:52 GMT 7
Hmmm, ...
let me quote the first chapter of the module description: "When module FIREFLY is activated the built-in iTunes server (mt-daapd) is deactivated. FIREFLY will start indexing all files with extensions .mp3, .m4a, .m4p, .wav, .flac and .ogg located in the iTunes folder. Only when this is done will the built-in web server be ready."
I marked the important part in bold
|
|
ferg
Full Member
Posts: 119
|
Post by ferg on Feb 9, 2008 4:10:56 GMT 7
i think to reduce the risk of confusion it is always better to turn off the in-built itunes server. There are too many mt-dappt's running as it is!  |
|
|
|
Post by getmythe on Feb 9, 2008 4:28:13 GMT 7
The FIREFLY module takes care of everything; When starting up it first disables the built in iTunes service, then kills any running mt-daapd processes and at the end disables the iTunes start button in the web interface.
There is only one problem; In case module UTILS was not installed prior to FIREFLY the library setup is incomplete. You have to remove FIREFLY, install UTILS and then reinstall FIREFLY again.
|
|
ferg
Full Member
Posts: 119
|
Post by ferg on Feb 9, 2008 21:19:05 GMT 7
Oh just noticed something that has just occured to me.
Since i have installed meta and utils i have been getting these massively long beeps. These indicate that the fan has failed, correct?
Why would this suddenly appear after installing this? Is there are setting that has been altered that i don't know about? I never got any fan failures before. Mostly it is sorted with a restart, but i just thought i would make the point.
|
|
