Post by bobkatz on Aug 5, 2009 10:01:55 GMT 7
Hi, all. I have a 5200Pro and I lost AFP support perhaps due to a power failure this morning. Yes, the unit is on a UPS, but it's too complicated to explain, and the unit may have undergone a power stress. However, the RAID came up fine, no rebuild necessary or other problem. All files are intact. The only problem is none of the apple clients can connect by AFP, it hangs after doing a connect to
afp://192.168.0.212 then picking the share and it hangs...
AFP is reported as fine on the Thecus, file system is reported as fine.
SMB is working fine from all the clients. We do still need AFP because some apps only recognize files by their resource forks on the Macs. Everything is OS10.4 or 10.5.7. Yes, I checked the Thecus support center and interestingly, it reported that 10.5.2 had some hanging problems when logging into an AFP volume, but the hanging problem is there with all our 10.5.7 clients, and it began this morning. Any ideas? Firmware is 2.00.13, and I'm thinking of upgrading in hopes it will kickstart the Thecus. This is my first post on this forum, previously I disagreeistant handled this chore, but he's left!
afp://192.168.0.212 then picking the share and it hangs...
AFP is reported as fine on the Thecus, file system is reported as fine.
SMB is working fine from all the clients. We do still need AFP because some apps only recognize files by their resource forks on the Macs. Everything is OS10.4 or 10.5.7. Yes, I checked the Thecus support center and interestingly, it reported that 10.5.2 had some hanging problems when logging into an AFP volume, but the hanging problem is there with all our 10.5.7 clients, and it began this morning. Any ideas? Firmware is 2.00.13, and I'm thinking of upgrading in hopes it will kickstart the Thecus. This is my first post on this forum, previously I disagreeistant handled this chore, but he's left!