FW 2.00.15.4 (beta)

[peanuts]

A new beta firmware is available:

www.thecus.com/Downloads/beta/N5200_N5200PRO_FW_beta_2.00.15.4.bin

N5200/N5200PRO beta firmware V2.00.15.4

1. This is just a beta, not official release.
2. Fixed the HDD detection issue when below HDD hot plugged in.
- Seagate 750G, 1TB, and 1.5TB
(Please note N5200 doesn't support 1.5TB)
- Samsung 750G and 1TB
3. Changed Samba version to 3.0.33 to support Windows Server 2008 AD.
!!Warning!! Every ACL folder needs to be re-configured again;
otherwise, AD uses would be unable to access all ACL share folders.
1) Reboots NAS when new beta firmware upgraded.
2) On one of the ACL setup page, click "Sync AD account" to
retrieve AD users and groups from AD server.
3) Open the ACL setup page of every share folder, set the access
rules, and then submit it.
4. File info:
2008/12/16 21:36 33,657,632 N5200_N5200PRO_FW_beta_2.00.15.4.bin
MD5(N5200_N5200PRO_FW_beta_2.00.15.4.bin)= e188f6c47a88236cb5636a8be2f84a9b

[gonz0]

i got this over a week ago N5200upgrade.2.01.07.4.bin

seems a newer version of the one released

[gonz0]

i chose not to install it in the end as the finals due at the end of the month, they had fixed the jumbo frames for the Br version in that one, i was told it is a major update there working on and was still "buggy"

adocqq.bay.livefilestore.com/y1pTSTF4k3w_YBw7qt5WRw5YrprpS0DQERT42wxwsSUvTSBUbE-f7GpOH8SoUQPTwTnY3ulUjBwwXF5pLTTUM8ikA/N5200upgrade.2.01.07.4.bin?download

[randalo]

I never had any problems with the firmwares, but since 2.00.15.4 the scheduled power up/down is not working correctly. The system sends messages that it will shut down, but it stays on and isn´t reachable anymore via tcp-address and also the network drives are not connected any more.
Only doing a coldboot will help.

I hope thecus will give a solution real quick.

Randalo