Reply

Mixing 7200.8 and 7200.10 drives in a a RAID

« Prev
1
Next »

philbyfish
New Member

Posts: 2

Mixing 7200.8 and 7200.10 drives in a a RAID Mar 3, 2008 18:15:46 GMT 7

Quote

Post by philbyfish on Mar 3, 2008 18:15:46 GMT 7

Greetings all,

Can anyone tell me what is likely to happen If I replace a dead Seagate 400GB SATA 7200.8 in a 4100 NAS configured as RAID 5 with a Seagate 400GB SATA 7200.10?

Will it work? Help required!

regards

Phil B

turmalin77 New Member Posts: 7	Mixing 7200.8 and 7200.10 drives in a a RAID Mar 3, 2008 19:01:55 GMT 7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by turmalin77 on Mar 3, 2008 19:01:55 GMT 7 Yes - why not? 400 Gb old to another 400GB ... no problem. I also did this. The speed size is nearly the same... so no problem.

philbyfish New Member Posts: 2	Mixing 7200.8 and 7200.10 drives in a a RAID Mar 9, 2008 12:08:17 GMT 7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by philbyfish on Mar 9, 2008 12:08:17 GMT 7 Thanks for the advice. I added a 400GB 7200.11 disk into the RAID as a spare and it is recognised and seems to be working. regards Philbyfish