Firmware 1.00.07 available now

[omega]

Hi,

finally the new N5200 firmware 1.00.07 has been released:

Firmware image: www.thecus.com/Downloads/N5200upgrade.1.00.07.bin

Firmware Upgrade Notes: www.thecus.com/Downloads/N5200_FWUPG_10007.pdf

Firmware Release Notes: www.thecus.com/Downloads/N5200_Release_Note_v10007.pdf

Haven't checked the differences yet and I don't know if the modules will run on the new firmware. As I'm not having the time to convert them in the very near future be careful not to upgrade to early if you want to use my modules.....

Andreas

EDIT: corrected link for firmware upgrade PDF file (thanks Arctra!)

[gideon007]

This time, they even released the sources right away. Thecus is becoming fast in its age

[Arctra]

Correction on release notes URL:
www.thecus.com/Downloads/N5200_Release_Note_v10007.pdf

Still not 100% awake. Scratch that.

Firmware image: www.thecus.com/Downloads/N5200upgrade.1.00.07.bin

Firmware Upgrade Notes: www.thecus.com/Downloads/N5200upgrade.1.00.07.bin

Are these not the same?

[omega]

What is wrong?

[giessle]

Hi,

I have one thecus working with firmware 1.00.7 and the second still running with 1.00.65. omegas modules like meta sysuser and sshd are still working with firmware 1.00.7

With firmware 1.00.7 you can perform a filesystem check via the web interface in the storage-section.

[omega]

Hi giessle,

Fine that they seems to be running....

Did you reinstalled them after upgrading or did you just kept them.....

Andreas

P.S. I'm still running 1.00.06.5....

[gideon007]

shutdown module seems to be not working. Need to investigate further (whether it is because imgdup is installed (I got it disabled now) and if reboot is working at least).

[nogami]

No problems with the update to 1.00.07, just trying out the new fsck operation to check the status of my drive (which looks like it will take about 30-45 min to complete on my 2.5tb array).

N.

[giessle]

Hi,

with fsck you can solve the "quota cannot be reset to 0"-Problem someone described in the "installations"-section. I had the problem too, it was folder-specific. after doing fsck I was able to reset the quota ;D

[omega]

What do you mean by doing fsck? Did you use the new Thecus filesystem check facility at the administration page or did you do a fsck manually?

In the second case, I doubt that the fsck is related to the quota management. In the first case, I still haven't had time to check the new fsck script from Thecus, but it is possible that they are not only doing a fsck on the filesystem but even more they are resetting the quota management....

Andreas