|
|
Post by atrix415 on Nov 4, 2006 3:28:00 GMT 7
Hi, I have just began to transfer large files and folders (2-7gigs) each after awhile about 20 minutes into transfering from the computer to the NAS I received an error saying that the path no longer exist and my transfer stops. Does anyone know a quick fix to this? Also same goes to multiple files transfer (20+ or more things)
thanks
|
|
|
|
Post by johnneyboy on Nov 4, 2006 14:47:54 GMT 7
I'm creating and have moved files of 90GB+ without issue, however I am on 1Gbit ethernet. Each night I create images of my main systems C-Drive 30GB+. I did have (NAS) drive errors the other night, but since taking the unit apart and swaping over the drive locations, and rebuilding the array all has been fine.
You might want to install the ssh and passwd modules and have run the dmesg command to see if there is any disk errors. You might see the following error
eth0: Too much work at interrupt!
but this does not seem to be an issue from what I have read around the internet on linux kernels.
John
|
|
|
|
Post by atrix415 on Nov 4, 2006 18:38:58 GMT 7
I found a quick fix ;D , well as of now (1hrs+) I didnt get anymore hangs or cutoffs. I am USING FTP and SSH.... Hope that helps others. AND IS VERY FAST!!!!  |
|
