Module is like most others... extract the zip and load the mod file through the gui.
When enabled it is set to use the following dir for downloads :
If it can't create that dir it will fail to start. This dir can be changed and the server started via the web interface :
Or launch from the modules page click NZBGET... Then Start NZBGET.
All the configuration is available on the web interface including adding news servers etc.
Like all instances of nzbbin once configured any .nzb files dumped in /raid/data/share/Nzbbin/nzb will automatically be downloaded, any parring needed to be done will be carried out and auto unrar'ing will take place.
You may need to post your config files (removing your news servers ofc or blanking username/password).
If all else fails you could :
- Uninstall the module - rm -rf /raid/data/module/backup/NZBGET - mkdir -p /raid/data/share/Nzbbin/dst - mkdir -p /raid/data/share/Nzbbin/nzb - mkdir -p /raid/data/share/Nzbbin/queue - mkdir -p /raid/data/share/Nzbbin/tmp - Reinstall the module - Configure your news server via the gui - /raid/data/module/NZBGET/shell/module.rc stop - /raid/data/module/NZBGET/shell/module.rc start - Drop an nzb file into /raid/data/share/Nzbbin/nzb - Click scan on the web page - Click refresh on the web page.
Looking at the 00.00.01 config it looks as though the web interface is set to upload to the wrong dir. /raid/data/share/Nzbbin rather than /raid/data/share/Nzbbin/nzb. But that shouldn't stop it from working if you manually drop the file in the nzb dir.