rayman
New Member
byte me
Posts: 25
|
Post by rayman on Nov 8, 2008 16:36:57 GMT 7
Yesterday I uninstalled the rtorrent modual and restarted the N4100+ but since the reboot I can not access the GUI via port 80 or 443.
I can still access via mapped drives and the setup util.
I have tried to reset the Nas as described in the manual and on other posts. Power up then hold reset for 30 secs, or hold rest then power up and release reset on beeb. The IP does change to 192.168.1.100 but the password is as previous.
I have removed all 4 drives, same result.
I can reset the IP in the setup utility aswell.
But the GUI is not accesable through any IP I set the Nas to.
If I set my laptop to 192.168.1.111 and connect directly to the Nas I still cant access the GUI, yet mapped drives and setup util are ok.
If I use the 'Start Browser' tab within the setup util I still get 'Internet Explorer cannot display the webpage'
I have tried via another pc and a G4 eMac, still no joy.
Any ideas?
|
|
rayman
New Member
byte me
Posts: 25
|
Post by rayman on Nov 10, 2008 21:52:12 GMT 7
Have aranged RMA with re-seller as only 7 months old.
|
|
rayman
New Member
byte me
Posts: 25
|
Post by rayman on Nov 11, 2008 16:58:01 GMT 7
Port Scan has started ...
Port Scanning host: 192.168.1.100
Open TCP Port: 21 ftp Open TCP Port: 139 netbios-ssn Open TCP Port: 445 microsoft-ds Open TCP Port: 548 afpovertcp Open TCP Port: 1194 Open TCP Port: 2000 callbook Port Scan has completed ...
Speaks for itself.
|
|
|
Post by joey129 on Nov 11, 2008 20:21:05 GMT 7
What you should try:
Connect to the nas through ssh, en find and replace the httpd.conf with a backup or old one.(i had the same problem and this worked for me)
|
|
rayman
New Member
byte me
Posts: 25
|
Post by rayman on Nov 20, 2008 19:18:26 GMT 7
Yes it may work, but i need to access the web GUI to enable SSH in the first place.
|
|