|
|
Post by armani on Nov 12, 2007 19:03:02 GMT 7
I own an N3200. With some wrong settings I have locked myself out of the configuration page. The reset function, as described in the user manual, only resets IP address and password and therefore doesn't solve my problem. I can ping the device but can't access its webpage. Does anyone know a way to factory reset without access to the config page?
Thanks for help
|
|
|
|
Post by marty on Nov 12, 2007 20:19:12 GMT 7
On N2100, you can temporarily reset the IP address to 192.168.1.100, and select whether to reset to factory default or do a file system check.
Do you have that page available?
Marty
|
|
|
|
Post by armani on Nov 12, 2007 20:47:23 GMT 7
The reset to IP 192.168.1.100 works but I can't find a way to select factory defaults. Unfortunately, trying to connect with the browser to the IP address results in page not available.
Any other way possible?
Armani
|
|
|
|
Post by dbridges on Nov 13, 2007 4:19:23 GMT 7
What were the wrong settings that got you locked out in the first place?
Have you tried https? That seems to be working for a few people who lock themselves out of the n2100.
armani you're basically one of the early adopters of the n3200 so you're probably going to have to experiment a lot and solve the by yourself.
We can offer suggestions but that's about it.
Good luck.
|
|
|
|
Post by N2100Owner on Nov 13, 2007 9:35:07 GMT 7
Try press the reset button on the back panel during boot up, then its IP address will be changed to 192.168.1.100. You might have to change your PC's IP address to the same segment. When you point your browser to 192.168.1.100, you should see the Factory Default Mode. There you will see options to Run File System Check, Reset to Factory Default, or Reboot. At least this is what N2100 looks like. |
|
|
|
Post by armani on Nov 13, 2007 14:35:59 GMT 7
Thanks a lot for helping.
The wrong settings: I disabled Webdisk Support and UPnp, which I didn't think I would ever use... After that the device wanted to reboot, which I confirmed. Since then I can't access the webpage for configuration.
best regards
Armani
|
|
|
|
Post by N2100Owner on Nov 13, 2007 15:52:05 GMT 7
On N2100, when you disable WebDisk (HTTP) the administration login page will also be disabled, but you can still access the administration login page thru Secure WebDisk (HTTPS) option.
Use HTTPs://[n2100_IP]/ instead of HTTP://[n2100_IP]. I think N3200 should be the same way.
|
|
