|
Post by thorstense on Oct 21, 2007 19:52:04 GMT 7
Hello,
Last night the nsync tasks failed.
The PUREFTPD was not running. But yesterday I have test PUREFTPD and later I have stop the service. After I stop PUREFTPD I have not restart the N5200.
In the morning I have seen an error message in the LOG that the user for the nsync task no exist? Now I have restart the N5200 and the nsync works fine.
Is this known?
Best regards, Thorsten :-)
|
|
|
Post by peterfu on Oct 21, 2007 20:06:55 GMT 7
Hi Thorsten, disabling the module should restart the standard ftp service - have to look at it. But as workaround : disable/enable the standard ftp service after disabling or uninstallation of PUREFTPD. br Peter
|
|
|
Post by thorstense on Oct 21, 2007 20:51:43 GMT 7
Hello Peter,
Thanks for your answer! I will try to stop and restart the standart FTP service after use PUREFTPD.
Greetings, Thorsten :-)
PS: This Board is an English Board or I can write in German to?
|
|
|
Post by peterfu on Oct 21, 2007 22:24:06 GMT 7
Hi Thorsten, I think conversation on the board should be in english - cause other users might get usefull information out of the conversation. br Peter
|
|