|
|
Post by peanuts on Sept 23, 2007 0:54:18 GMT 7
I have re-created my RAI and of course the installed modules got lost during that operation.
Now, the RAID is reported "healthy" but I can't install modules.
I get the following error message. "Your URL is not define, please check it!"
I tried to load the modules from different locations, but no success.
|
|
|
|
Post by cyrilix on Sept 24, 2007 9:32:30 GMT 7
I am also running 2.00.03, and I have the same problem.
|
|
|
|
Post by peanuts on Sept 24, 2007 14:35:10 GMT 7
Ok, then it seems to be the firmware. Can somebody confirm which older firmware works?
I would then downgrade, install the modules and upgrade again.
|
|
|
|
Post by omega on Sept 24, 2007 16:02:14 GMT 7
Therefore I explicitely wrote in the announcement for BETA firmware 2.00.03: if you're not sure what you're doing, don't install it  I expect that downgrading will not be possible and due to Thecus it is not supported at all. I'm on a 3-4 week business trip in central china and in that time I'll not be able to care what needs to be done make the modules run on 2.00.03, sorry.  So for all others: please don't use 2.00.03 as long as it is not clear why the modules are not running!! Andreas |
|
|
|
Post by peanuts on Sept 24, 2007 16:33:28 GMT 7
FW 2.00.03 fixed the problem of not automatically mounting external disks in previous FWs. I was aware of the risks and I have a full backup of my data. Currently the module bug is just annoying...
About the downgrade: would the trick with factory_test.sh and a USB stick work with FW 2.00.01? Could anybody send me a modified factory_test.sh? I have no other Linux system running vi other than the N5200.
|
|
|
|
Post by fajo on Sept 25, 2007 1:01:28 GMT 7
There seems to be a bug in some parts of the WebUI (not only module management) with scripts that are not called through getform.html (scripts with an extension of .html).
I just reported this to thecus support.
Do/did you receive the same message when you tried to add or modify a share/folder ?
/Falk
|
|
|
|
Post by peanuts on Sept 25, 2007 1:05:42 GMT 7
Do/did you receive the same message when you tried to add or modify a share/folder ? No, that worked. |
|
|
|
Post by cyrilix on Sept 25, 2007 1:30:35 GMT 7
Therefore I explicitely wrote in the announcement for BETA firmware 2.00.03: if you're not sure what you're doing, don't install it I expect that downgrading will not be possible and due to Thecus it is not supported at all. I'm on a 3-4 week business trip in central china and in that time I'll not be able to care what needs to be done make the modules run on 2.00.03, sorry. So for all others: please don't use 2.00.03 as long as it is not clear why the modules are not running!! Andreas It's really just an annoyance but no big deal -- I don't expect you to just fix it all of a sudden or even fix it at all, but there's no harm in discussing it, right? |
|
|
|
Post by fajo on Sept 25, 2007 3:52:02 GMT 7
Ok, just checked the remaining scripts (and addshare) again. The issue seems to be with module.htm/module.html only. module.htm calls module.html directly instead through a wrapper. Either the check in module.html should not be there or a wrapper (like gtform/setform) should be used.
/Falk
|
|
