|
|
Post by spider on Sept 1, 2007 22:47:59 GMT 7
Hello,
I cannot login to N5200PRO on port 22 (SSH) using Putty. The connection attempt fails with "Network error: Connection refused."
It seems like SSH server is not running, or at least not on port 22.
Should it be running on port 22?
How to start SSH server?
Thank you.
|
|
|
|
Post by spider on Sept 1, 2007 23:09:29 GMT 7
After reading more on N5200 -- SSH daemon is not part of standard N5200PRO.
The forum suggests to install SSHD and SYSUSER mods.
Now I'm trying to find how to download and install the packages.
I've purchased N5200PRO this week and have many more "silly" questions.
Thank you for your patience.
|
|
|
|
Post by peterfu on Sept 2, 2007 12:46:47 GMT 7
A perfect source for modules is the Thecus Wiki: onbeat.dk/thecus/index.php/Main_PageThere You will find i.e the SSHD and SYSUSER modules - and many others - and a lot of explanations how to install those modules. br Peter |
|
|
|
Post by frakuk on Sept 5, 2007 21:53:33 GMT 7
I had a working ssh putty connection and then it just stoped working one day. I removed sshd and sysusers modules only to fined that i now get an error when i try to install sshd again.
Br
Jase
|
|
|
|
Post by sauron on Sept 12, 2007 15:37:43 GMT 7
I had this problem - as I'd only just set the device up, I got round it by destroying and re-creating the RAID, which isn't the best solution....
As far as trying to fix it goes, you can install the SERGETTY module and log in on the serial port - that should give you a route that'll allow you to see why sshd is breaking.
You can also try the RENMOD patch to move your modules directory out of the way, and then try re-installing the SSHD and SYSUSERS module. Have a look at the "SSH issue after install" thread in the installations forum for more details.
HTH,
Mike
|
|
