jamis
Full Member
Posts: 109
|
Post by jamis on Oct 19, 2006 6:24:11 GMT 7
Anyone ever notice their LCD display not updating or cycling through its information?
I just noticed that mine is stuck on:
Thecus N5200 03:35:55 2006/10/14
The unit is working fine, though thats all the LCD shows. It doesn't cycle through LAN, WAN, RAID, etc. I'm guessing a reboot will fix it, but I'd rather not just to get the LCD going again.
|
|
|
Post by MasterBlaster on Nov 4, 2006 4:12:51 GMT 7
The display of my thecus also hangs when showing the time (any correlation?). A reboot always solves the problem. The time period between the hangs isn't the same. It ran for 5 to 15 hours until stopping with the time. It seems to be a joke, as if it always wants us to know when it stops. I will write to the thecus support with this, because it's simply annoying. A friend of mine bought the same model shipped in company with mine in one box and has none of that problems.
|
|
jamis
Full Member
Posts: 109
|
Post by jamis on Nov 4, 2006 21:07:26 GMT 7
It only happened to me once... though with the latest firmare, the display stopped working all together (glows, but no text).
|
|
|
Post by turtlesoup on Nov 10, 2006 1:59:38 GMT 7
With the 1.00.4.9 firmware, mine will eventually freeze on the time display as well. Never saw this problem with the 1.00.3.
|
|
mango
New Member
Posts: 7
|
Post by mango on Nov 10, 2006 20:14:09 GMT 7
My LCD display froze after 10-16 hours use with firmware 1.00.03 and it still freezes with the beta firmware 1.00.04.9. No change whatsoever... and every 1-2 days it also reboots itself.
|
|