|
Post by chrisiw on Jul 11, 2006 0:57:01 GMT 7
Recently purchased a N1050, formatted the disk (30gb FAT 32).
I can copy files from my PC onto the drive but when I try and copy from an SD card via a card reader nothing happens? I have the power light but nothing else occurs.
Chris
|
|
|
Post by N2100Owner on Jul 11, 2006 11:39:41 GMT 7
Is it a 7-in-1 card reader or something similar?
|
|
|
Post by chrisiw on Jul 11, 2006 22:55:29 GMT 7
8-in-1 Chris
|
|
|
Post by N2100Owner on Jul 11, 2006 23:51:13 GMT 7
I guess it's a compatibility issue between N1050 and your card reader. Try to read it off your digital camera or single card reader (I know it's hard to find).
|
|
|
Post by chrisiw on Jul 12, 2006 4:31:19 GMT 7
Thanks, will give it a try.
|
|
|
Post by ryebank on Jul 14, 2006 15:59:42 GMT 7
Thecus advice for the N2100 copy option is to make sure a single card is in a reader slot before you connect a multi slot reader to the N2100 - this might help too for the N1050 (poor little dear probably gets confused about which slot you want to copy from)
|
|