laura
New Member
Posts: 1
|
Post by laura on Sept 2, 2021 20:28:36 GMT 7
Hello everyone
I have two identical thecus n7700pro configured in high availability. Each nas has 2 disks configured in RAID 1. I would like to add to each one a disk (JBOD, no raid but redundancy thanks to the HA of the system).
Reading documentation
I can not understand if I can add the disks once the HA is configured and working, I'm afraid to damage the existing raid and data because the document specifies that the raids must be created before activating the HA and it never cover the possibility of adding disks / RAID into a configured and working system.
Do any of you have experience with this?
thanks in advance
Laura
|
|