|
|
Post by reidmefirst on Mar 7, 2011 2:32:59 GMT 7
Hi all -
I'm thinking about buying a N4200, which uses the same firmware image as the N5500. Before buying, I'd like to dig into the firmware a little to see how hard it is to modify and fix some of the bad stuff I've seen in the N5500 Live Demo. To that end, does anyone have the decryption key for the N5500 firmware?
Thanks,
Reid
|
|
|
|
Post by crishmac on Sept 29, 2011 12:00:03 GMT 7
I have purchased 2 days ago a N5500 ... after finish power-on it show firmware release was 3.00.01
few minutes to setting LAN and explore web interface and I decide to update firmware at last release (3.00.04) with more interesting functions.
Here start problems... and below the sequence of operations made:
1) update firmware from web interface --- >
- on led panel see message: start upgrade
- after few moment led cycle usual info messages
- after 30 sec (+o-) web interface see message: Upgrade failed... on Led see MSG: Fail code C5
2) restart upgrade: same result
3) restart Unit -> unit hang after message: NAS ready
4) force power off unit
|
|
|
|
Post by lordmac001 on Nov 29, 2011 19:09:05 GMT 7
1) Added "AutoModule" support.
2) Added TFTP server function.
3) Added Portugal language support in admin web interface.
[Bug Fixes]
1) Fixed the issue that WD My Book and My Passport caused USB driver panic thus RAID/Disk status incorrect.
2) Fixed the issue that Mac computer cannot login into NAS ACL folders by AD user account.
3) Fixed "fdisk fail" issue while doing firmware upgrade.
|
|
|
|
Post by jackmartin199030 on Mar 16, 2012 17:00:16 GMT 7
1) update firmware from web interface --- >
- on led panel see message: start upgrade
- after few moment led cycle usual info messages
- after 30 sec (+o-) web interface see message: Upgrade failed... on Led see MSG: Fail code C5
2) restart upgrade: same result
3) restart Unit -> unit hang after message: NAS ready
4) force power off unit
|
|
|
|
Post by holy2411 on Mar 19, 2012 16:16:44 GMT 7
1) update firmware from web interface
Led see MSG: Fail code C5
2) restart upgrade: same result
3) restart Unit -> unit hang after message: NAS ready
4) force power off unit
|
|
|
|
Post by rolledm on Oct 27, 2012 13:42:48 GMT 7
I downloaded and updated the new firmware. It did not take long to update, and once it was done the unit had to reboot which only takes about 2 minutes. The system sounds off with a loud beep when it is fully up and running.
|
|
