bg951
New Member
Posts: 2
|
Post by bg951 on Mar 29, 2010 3:00:53 GMT 7
I am trying to install a brand new N0204, on a W7 network. I powered the unit on, and connected to a port on my D-Link router/switch/AP.
I can see that the DCHP server on the D-Link has assigned the N0204 an IP address.
The Thecus wizard does not see the N0204. It reports a demand that the firewall be checked.
I wonder what the firewall should checked for?
Why is it so hard to install this product?
|
|
bg951
New Member
Posts: 2
|
Post by bg951 on Mar 29, 2010 7:15:56 GMT 7
The N0204 installed. Don't know what changed. The user interface is poor- if you aren't on the inteneded path, you are lost.
Thecus could do better and should do better!
|
|
|
Post by alanslingsby on Apr 8, 2010 0:46:32 GMT 7
I have a similar problem I am trying to install a brand new N0204, on a W7 network. I powered the unit on, and connected to a port on my D-Link router/switch/AP. I can see that the DCHP server on the D-Link has assigned the N0204 an IP address. The Thecus wizard does not see the N0204. It reports a demand that the firewall be checked. I wonder what the firewall should checked for? Why is it so hard to install this product?
|
|