|
Post by selfdestruct on Aug 7, 2007 2:25:31 GMT 7
Good day everyone.
I've got a N2100 running with 512MB Quimonda (formerly INFINEON). It works superb, I would like to get more into the box, I have a couple of modules installed, was also able to access mldonkey via telnet, but I never achieved to get access to the OS via telnet. What port do I have to use, 23 gives me a timeout or no response. I tried it from a WinXP machine with the telnet command and as well with putty. No luck. Could anybody help?
Thank you very much...
|
|
|
Post by omega on Aug 7, 2007 5:34:09 GMT 7
Hi to Australia!?
As far as I know there is no telnet daemon on the N2100 and there is no telnet daemon module available....
But don't panic: just use SSH instead of telnet. Putty is the right program to do it.
If you haven't installed the SSH module yet, you need to install it in advance of course.
Good luck,
Andreas
|
|
|
Post by selfdestruct on Aug 7, 2007 9:04:13 GMT 7
now I have the SSH module installed. Still was not successful. Please give step by step advice...
Thx in Advance...
|
|
|
Post by dbridges on Aug 7, 2007 13:33:32 GMT 7
Are you using putty or are you still trying to use telnet?
Did you enable the SSH module. Did you reset the password?
What messages is putty giving you?
|
|
|
Post by selfdestruct on Aug 7, 2007 19:15:14 GMT 7
SSH mod is enabled using Putty
Yahoo, I'm inn. ...
Now what can I do there?! Thanks for the quick help so far.
|
|