Post by ctipping on Nov 9, 2008 22:44:16 GMT 7
hi all,
I started up my N299 today and it could not find the JBOD'd RAID drives (2) that I had working fine before. The configuration seems lost? There wasn't anything wrong with the drives either, both were functioning normally.
The drives are: 500 Gb Western Digital WD5000ABYS Caviar RE, SATA300, 7200 rpm, 16MB Cache, 8.9 ms, NCQ
The firmware I have loaded is V1.00.24
Also I can't shut down the system from the web broswer, it says its shutting down in 10 seconds but the actual unit never does? I have to push the front button to get it to power off. Restarting seems to be getting iffy also, it works but only if the cable running into the NAS is moved around a bit, like something inside is loose.
I started up my N299 today and it could not find the JBOD'd RAID drives (2) that I had working fine before. The configuration seems lost? There wasn't anything wrong with the drives either, both were functioning normally.
The drives are: 500 Gb Western Digital WD5000ABYS Caviar RE, SATA300, 7200 rpm, 16MB Cache, 8.9 ms, NCQ
The firmware I have loaded is V1.00.24
Also I can't shut down the system from the web broswer, it says its shutting down in 10 seconds but the actual unit never does? I have to push the front button to get it to power off. Restarting seems to be getting iffy also, it works but only if the cable running into the NAS is moved around a bit, like something inside is loose.