Thecus N299 device discovery not discovering

new

« Prev
1
Next »

forster
New Member

Posts: 1

Thecus N299 device discovery not discovering Jul 24, 2008 11:52:05 GMT 7

Quote

Post by forster on Jul 24, 2008 11:52:05 GMT 7

;D
Hello - We have installed the Thecus Setup Wizard for our new Thecus N299 and run the device discovery which fails to discovers the Thecus. We can access the Thecus via IE7 using the IP address 192.168.1.4. It completes the Raid setup but we can not run any of the other utilities. When the 2 hour wait for the Raid setup was over and the unit rebooted the raid configuration was gone.

wuest
New Member

Posts: 2

Thecus N299 device discovery not discovering Aug 3, 2008 0:22:45 GMT 7

Quote

Post by wuest on Aug 3, 2008 0:22:45 GMT 7

I assume to have the same problem. Device discovery doesn't show any results. Cabling is between Vista PC and N299 (upper WAN), additionally between N299 (down LAN) and the router.

One more problem:
Given the N299 fixed IP address, the input of i.e. 192.168.1.100 into the browser (IE7) outputs one big jpeg picture "IIS7" (internet information services) signed with Microsoft Corp. at the end of the screen!!!

I tried to find the "reset button" (to be on the front panel as described in the N299's user manual), but I could't find it!!