|
Post by mlarocque on May 15, 2008 13:06:06 GMT 7
Hi folks, I just upgraded the firmware on my N5200BR from 1.00.08 to 2.00.08. After the update I: - can no longer connect to the web interface (server does not respond).
- can no longer connect via afp (apple file protocol)
- can connect via smb
Since I _can_ connect via smb, I can access my data, but not being able to access the web interface has me very worried. Does anyone have any thoughts? Thx, Mike
|
|
itlan
Junior Member
Posts: 93
|
Post by itlan on May 15, 2008 21:35:35 GMT 7
Was the upgrade successful, any issues?
Can you connect to SSL on the web interface?
Are you sure your hitting the right I.P.? If your connecting via smb windows will do the I.P. lookup of the mapped share so if in the process you got a new I.P you may just be accessing the wrong I.P. Ping the box or look it up in your router to be sure you hitting the right guy etc.
Try a factory reset to default variables as your last resort.... Dont think it effects your data, but double to check first in the manual etc.
|
|
|
Post by N2100Owner on May 15, 2008 22:00:59 GMT 7
If you are worried about your data, before you do the reset to factory default, turn off the machine and remove the disk drives, then do the reset to factory default.
This way even if the system is messed up, you still have your data.
Just my two cents.
|
|
|
Post by omega on May 15, 2008 22:17:20 GMT 7
Can you login via SSH?
Andreas
|
|
|
Post by mlarocque on May 19, 2008 23:32:33 GMT 7
Re: Was the upgrade successful, any issues?
It seems to have been successful.
Re: Can you connect to SSL on the web interface?
I get the same timeout when I try to connect via SSL. Same thing with curl. The web server isn't running.
Re: Are you sure your hitting the right I.P.?
Yup, I can ping the device just fine.
Re: Can you login via SSH?
I wasn't aware that you could ssh in. That ability wasn't available in the old firmware. How does one ssh in the the N5200? Pointers appreciated.
|
|
itlan
Junior Member
Posts: 93
|
Post by itlan on May 20, 2008 12:09:11 GMT 7
You would needed to have installed the SSHD & SYSUSER modules before it bonked. Most/many Thecus users have these installed already since their critical to do other things on the box. So based on your response you dont have these installed
|
|
|
Post by mlarocque on May 21, 2008 3:12:36 GMT 7
Looks like I'll need to reset to factory defaults and try to upgrade again. Grrr.
Thanks folks.
|
|
itlan
Junior Member
Posts: 93
|
Post by itlan on May 28, 2008 0:01:59 GMT 7
|
|
glee
New Member
Posts: 3
|
Post by glee on May 29, 2008 12:28:15 GMT 7
Hi everyone, I just got the same issue with the Web Interface. I upgraded to 2.00.08 about 2 weeks ago(?) and everything seemed to work fine. Then yesterday I get a 404 error when I try to get to the Web interface. I can ping the 5200 I can puTTY into it I can WinSCP into it I had installed the SYSUSER and the SSHD modules I cannot get to the interface using https ( I assume it is the standard 443 port?) I can get to my data, but I cannot change anything. I can't rename, add, create new folders, etc unless I map my drive using the account "sys". Of course, That is how I got to here. I've had trouble with mapped drive permissions since I upgraded to Vista. I figured the new firmware might fix the problem, but I think I just get myself "fixed". Any ideas? My linux knowledge might generously be described as "just enough to get myself into trouble" since I am now there. Thanks in advance UPDATE: so i guess that the ability to connect as sys to my share is temporary. I haven't checked the timing, but after a while, the permissions on my share go away and I can't use sys to copy, rename, create, etc, either.
|
|