manit
New Member
Posts: 1
|
Post by manit on May 4, 2008 18:10:23 GMT 7
Hi,
I bought N299 a week ago and could not power on the unit. I got a replacement, but the same.
I have connected the hard disks and followed the exact steps as mentioned in the guide, but no solution. I am not sure if both the units are faulty or any thing else that I am obviously missing??..
|
|
|
Post by polliwog on May 21, 2008 21:27:56 GMT 7
I bought a N199, and find this problem. I change a li-ion battery and it's OK now. ;D
|
|
|
Post by markstewie on May 22, 2008 14:30:07 GMT 7
Hi, I bought N299 a week ago and could not power on the unit. I got a replacement, but the same. I have connected the hard disks and followed the exact steps as mentioned in the guide, but no solution. I am not sure if both the units are faulty or any thing else that I am obviously missing??.. did u carefully put the hdd tray into the case? u could have chipped off a resistor on the logic board, these things happen sometimes. it could also be that the HDD's draw too much power or their broken.
|
|