Post by tomwall on Apr 15, 2008 12:42:40 GMT 7
I have formatted a USB HDD as FAT32,
According to the manual;
The attached device will be located at \\192.168.1.100\usbhdd\usb1\1\ where 192.168.1.100 means the IP address of N299, usb1 stands for the first USB device, and 1 stands for the first partition
That location cannot be found, the USB HDD is recognised as one USB HDD under NAS log in admin storage. The USB HDD is connected to the front panel USB port (the rear is occupied by my printer and the second rear USB port is still not usable)
How do I access the USB HDD (200GB Maxstor ) files?
Is the manual incorrect? (Its has been in some instances) Is there any other way to see the files on the USB HDD?
Cheers,
Tom
PS
Seems odd if the HDD is nor workable with N299, seeing it shows up in the admin pages.
T
According to the manual;
The attached device will be located at \\192.168.1.100\usbhdd\usb1\1\ where 192.168.1.100 means the IP address of N299, usb1 stands for the first USB device, and 1 stands for the first partition
That location cannot be found, the USB HDD is recognised as one USB HDD under NAS log in admin storage. The USB HDD is connected to the front panel USB port (the rear is occupied by my printer and the second rear USB port is still not usable)
How do I access the USB HDD (200GB Maxstor ) files?
Is the manual incorrect? (Its has been in some instances) Is there any other way to see the files on the USB HDD?
Cheers,
Tom
PS
Seems odd if the HDD is nor workable with N299, seeing it shows up in the admin pages.
T