N299 security/ user permissiom issue after upgrade

[kee]

>:(After I upgrade my N299 fw to newest (1.0.0.15) , I can not access my old dictionary before I upgrade, windows said I have no permission to access.

1.
So, is there any way I can change the share permisson or I can connect using shell ?

2.
I can not open DATA/TIME setting as well as SMB/CIFS, CGI crash?

3. I can not change back to version 1.0.0.10, have tried change the information end of the fw file , seems can not pass the hash check. any idea?


Besides , seems the source of that firmware can not be download.
please help to my problem since I have upload about 80 G document to N299, and without any backup.

PS , My HDD*2 on 299 using RAID1, so I can not mount disk to other PC to save my data!

Any developer can help?

[Courtney]

I am also having troulble with user permissions. Is there a way of resetting them?

[Mark]

Hi,

I hope you read the installation notes before you did the firmware upgrade from 1.00.10 -- it clearly states:

For N299 with firmware 1.00.10 or earlier version,
please follow the procedure.
1. Backup all data out of the NAS.
2. Upload firmware
3. Remove the RAID, then create a new one.
4. Upload firmware onto the RAID again.
5. Put backup data back onto the NAS.

In other words, upgrading from 1.00.10 to a later version you will need to re-setup your RAID. If you had any data on it that wasn't backed up, I'd be guessing you've lost it.

Mark.