|
|
Post by wasted on Mar 1, 2007 18:57:11 GMT 7
I've just gone through the install procedure using the supplied 1.1.8 setup. It found the N1200 OK and completed the installation procedure. However, when I start the browser, I get a page saying 'Please Use Setup Wizard', rather than the expected Admin Interface login screen.
Any suggestions welcome ...
|
|
|
|
Post by marty on Mar 1, 2007 20:10:00 GMT 7
|
|
|
|
Post by wasted on Mar 1, 2007 20:26:13 GMT 7
OK, I'll try it even though it has the same version number as the one on the CD.
[Edit] Well, that worked ! Not sure why the version they are currently shipping on the CD (1.1.8) does not work, but the downloaded one (v1.1.8) does.
Note: you need to hit reload on the browser window to get the start screen.
|
|
|
|
Post by bennekou on Aug 21, 2007 4:22:17 GMT 7
Wasted did write: " I've just gone through the install procedure using the supplied 1.1.8 setup. It found the N1200 OK and completed the installation procedure. However, when I start the browser, I get a page saying 'Please Use Setup Wizard', rather than the expected Admin Interface login screen.
Any suggestions welcome ..." I have just seen the same: All installation, and initialization of the HD, was OK, and then the wizard said: "Start browser", the browser comes up with: "Please use Setup Wizard" and as "wasted", NO Admin Interface login screen."
I have updated the installation wizard to version: 1.1.9, build: 030101  ??
When I pres key F5, the Light "LAN" do blink!
It should be easy installation... Any suggestions welcome ...
I have not fount how "Wasted", did solved his problem !
//Bennekou - Denmark |
|
r32190
Junior Member
Posts: 57
|
Post by r32190 on Aug 21, 2007 7:58:40 GMT 7
I encountered the same thing when my remote PC is wirelessly connected to the network. You may try to connect your N1200 in wired Ethernet network.
|
|
|
|
Post by bennekou on Aug 21, 2007 12:52:07 GMT 7
I encountered the same thing when my remote PC is wirelessly connected to the network. You may try to connect your N1200 in wired Ethernet network. Thank you  But the N1200 is already connected directly to the Ethernet network.  //Bennekou |
|
r32190
Junior Member
Posts: 57
|
Post by r32190 on Aug 21, 2007 16:24:41 GMT 7
Maybe you are already in correct network topology, just want to double confirm. I meant the control PC should be in wired network.
Of course, N1200 has only wired network connection in default.
By the way, you must format your HDD during the setup, some vital config files must be put at your HDD 1st for the normal web interface.
|
|
|
|
Post by bennekou on Aug 21, 2007 21:32:26 GMT 7
Maybe you are already in correct network topology, just want to double confirm. I meant the control PC should be in wired network. By the way, you must format your HDD during the setup, some vital config files must be put at your HDD 1st for the normal web interface. Thank you r32190, but as I write I have formatted the HD (serveral times), Just dont get any Admin Interface. I am close to give up and return the device to the shop, because I can read many who has same problem. But no " How to do" = solve the problem. They just disappear! How hard can it bee Best regard Erik Bennekou |
|
alo
New Member
Posts: 12
|
Post by alo on Aug 25, 2007 3:58:45 GMT 7
When I want to enter the admin interface, I log in as:
User: admin
Password:****** (as set in the setup fase, "admin" is default)
Then all the admin functions are on the next screen.
I don´t see anyone saying they did that, so it´s not to be smart, just trying to be on the safe side.
kind regards
alo
|
|
??
