|
|
Post by baumfalk on May 29, 2007 17:01:31 GMT 7
Hi altogether, I am using a Thecus5200, Firmware 1.00.07. I have a simple question concerning the Modules from the Thecus wiki onbeat.dk/thecus : I cannot find the announced "Module Property Page", which should be available for the rsync, the sshd and the sysuser module. Can anybody help me? Arno. |
|
|
|
Post by peterfu on May 30, 2007 4:36:58 GMT 7
After You have installed a module you have to enable it - then in the column "name" just cklick on the module name - that's in fact a link to the module property page. Without enabling a module there is no access to the property page.
If You click on the module description - thats the link to the module description
br
Peter
|
|
|
|
Post by baumfalk on May 30, 2007 21:24:44 GMT 7
Hi again and thankyou for the reply, Peter. Unfortulately, on my system it does not work like you described. If I click the name of the module after enabling it, I just get a blank page with the small text "no name given" in the upper left corner  (The link which I follow by clicking the name is http://x.y.z.v/adm/getform.html?Module=SSHD , maybe this could be helpful...) Maybe it is a compatibility problem of the module(s) in connection with Firmware 1.0.7? Any other idea? |
|
|
|
Post by gideon007 on May 30, 2007 23:24:00 GMT 7
yes, this is a problem with the ...07 firmware (AFAIR). With ...08 and ...10 it works.
|
|
