|
Post by gideon007 on Feb 10, 2007 1:58:56 GMT 7
Upgrading the firmware to .07 did leave the modules in working order it seems. I tested ssh, info and imgdup. I know imgdup is working because Thecus did NOT fix the modules info page link (and only by enabling imgdup I'm able to acces it without entering the correct link manually)
|
|
|
Post by omega on Feb 10, 2007 2:10:50 GMT 7
I've expected that some of the bugs are not yet corrected in 1.00.07 and that we need to wait for 1.00.08. The 1.00.07 was handed over from the development department to the QA department on about 23.1.2007 so everything afterwards has been postponed for 1.00.08. But at least they are listening what we're saying and they are trying to fix their bugs. I'll be happy as long as they are supporting us.... Andreas
|
|
mumin
New Member
Posts: 26
|
Post by mumin on Feb 14, 2007 1:19:25 GMT 7
Hi I have the same Problem sea Peterfu "blank Screen" I want Install SSHD SYSUSER My System is new no Modules installed I have upgrated yesterday from 05 to 07 Firmware
that can solve my problem nevertheless ??
or I must proceed differently ? thanks
|
|
|
Post by omega on Feb 14, 2007 6:35:04 GMT 7
Hi mumin,
Did you install any modules while running 1.00.05? If no there is no need to use the RENMOD module as there is nothing to be fixed.
Otherwise just use the RENMOD module even on 1.00.07 - but only if you haven't installed any module on 1.00.07 yet (but this is what you're telling...).
Good luck!
Andreas
|
|
mumin
New Member
Posts: 26
|
Post by mumin on Feb 15, 2007 0:27:29 GMT 7
Hi I cannot install , browser open an empty side ! Tested with Firefox IE-Explorer Netscape Email - Notification is active ,no message I need login, I would like not with a "half linux" to work. What can I do Please Help which services must compellingly run please me to communicate, thank I do not have ftp actively, am that my problem must I try tomorrow
|
|
mumin
New Member
Posts: 26
|
Post by mumin on Feb 16, 2007 23:29:49 GMT 7
the ftp serves activated, still empty side has. All modules tried to install, none goes. --------------------------------------------------- What do I have still for which alternative? --------------------------------------------------- I want Install SSHD SYSUSER INFO
|
|
|
Post by peterfu on Feb 16, 2007 23:44:04 GMT 7
Hi mumin, i had similar problems, too. Fortunatly I had a brand new system with no data on it, so I decided to build up everything from sratch - so if You have no data on it try following: - hot remove your disks so you have a degraded array, you have to remove so many disks, that recovery is not possible any more - follow then the instructions the N5200 gives you - all is build from scratch
I've done this and all was build correct afterwards - If you have had an RAID5, then plug in the disks in a different order - not sure if it's working with RAID1, cause this is only mirroring, so there is no different order.
br Peter
|
|
mumin
New Member
Posts: 26
|
Post by mumin on Feb 17, 2007 1:08:58 GMT 7
Thanks for Answer
I have a RAID5 level available with 1,5TB overall memory. A Rebuild lasts at least 4Hours on my box is 400GB important data stored and is Shared to another Clients.
That is connected with much work. Is there really no other solution?
|
|
mumin
New Member
Posts: 26
|
Post by mumin on Feb 20, 2007 1:06:45 GMT 7
as the answers to look I must probably wait no other solution for the next firmware update , or really give it? I want to install simply only those modules sysuser sshd info. and can that not because an empty side appear !! I can not install from scratch ,N5200 is productive for each tip I am grateful thanks
|
|
|
Post by omega on Feb 20, 2007 1:16:54 GMT 7
Hi mumin, Maybe I can help you if you're answering my questions (see reply #63) .... If the module install is not working, try to install the RENMOD module. If it is still not working after that, I have no idea what's wrong so Pter might be right to reset the whole system. But still I'm not sure what's really going on on your machine as your descriptions are hard to understand and are not detailed enough, at least for me. Andreas
|
|
mumin
New Member
Posts: 26
|
Post by mumin on Feb 20, 2007 2:02:21 GMT 7
My System is new no Modules have any installed ^^^^^^^^^^^^^^^^^^ I have upgraded form 05 to 07 Firmware thats all
I cannot install module , browser open an empty side ! Tested with Firefox IE-Explorer Netscape Email - Notification is active ,no message that is my big problem
peterfy wrote this Reply #66
I have over 400GB Data stored ...
|
|
|
Post by omega on Feb 20, 2007 2:25:02 GMT 7
Hi mumin, for me it's not only hard to understand your English but it's hard to understand what you describe.... Even if you might think I'm asking goofy questions I need the answers and you're still not giving to answers to what I asked (even though you think you are). So I try it again: 1) Did you install any modules on 1.00.05? I think in your last post you wanted to tell me that you haven't had installed any modules at all in any firmware version, but you didn't told that explicitly and this point is very important. 2) Did you try to install the RENMOD module? I asked this several times but you're not giving any answers on this. Andreas
|
|
|
Post by peterfu on Feb 20, 2007 3:23:58 GMT 7
Hi Andreas, Hi mumin, may I step in here just to try a short summarize. - mumin has updated from 1.00.05 to 1.00.07 - no modules were installed on 1.00.05 - installing modules on 1.00.07 gives just a blank screen - RENMOD patch was not tried till now May I suggest following: mumin please try the RENMOD patch on 1.00.07 (Andreas : am I right that RENMOD is a patch and not a module, so RENMOD should be installed using the firmware upgrade and not the module installation? ) I think after installing RENMOD a reboot is necessary. If this is not working then please try to reinstall 1.00.07 again - perhaps something was damaged during upgrade. I suggest that You are still able to access Your data and You still see your shares, if not then a reboot might be dangerous. br Peter
|
|
mumin
New Member
Posts: 26
|
Post by mumin on Feb 21, 2007 1:21:49 GMT 7
thanks peterfu for help ;D
|
|
mumin
New Member
Posts: 26
|
Post by mumin on Feb 21, 2007 1:36:41 GMT 7
Hello omega history becomes still correctly difficult. Omega wrote NO Omega wrote NO I have empty screen all the same which I to install want except the module renmod Omega wrote NO
|
|