|
Post by scottharris on Oct 4, 2006 3:16:54 GMT 7
Since upgrading the firmware to 2.0.5, I can't get any further firmware upgrades to work. I go to the upgrade firmware page, browse to the .bin file I downloaded, and then click the button to apply the firmware upgrade. But nothing happens -- the progress bar moves for a bit, but no dialog box comes up or anything (I've tried through IE and Firefox; even tried resetting to default settings; nothing). I managed to upgrade firmware at least once or twice before this, and everything worked smoothly. I'm sure I'm forgetting to do something obvious, but I've checked the FAQ and seem to be following the instructions. Any suggestions would be greatly appreciated.
|
|
|
Post by ktulaman on Oct 5, 2006 3:13:49 GMT 7
Try downloading the firmware again. It would be nice if Thecus could put some MD5 checksum information next to the firmware file so that you can do a comparison after the download. I experienced a similar problem when i was trying to install an earlier version of the firmware and it turned out that the download of the firmware ended abruptly, and i was installing an incomplete file.
|
|
|
Post by scottharris on Oct 5, 2006 23:21:32 GMT 7
Thanks. I'll give that a shot.
|
|