|
Post by greybard on Feb 15, 2007 12:47:43 GMT 7
I successfully upgrade my to 1.00.07 and modified the adm page to get the modules, Info, SSHD, sysuser and IMGDUP working. All were showing correctly and info pulled up all information. I think started working on getting the email notifier working and kept getting the weird error of: "Missing behavior or php error ::tab alert" While trying to solve that error, I checked on the Drive/Raid/Flolder area and noticed that all my shared folders were gone. I tried a system check but it just sat there are the reboot and wouldn't reboot no matter what I did. power cycling showed as successful on the LCD but none of the front buttons do anything. The web interface seems to be down though the LCD does say it started and holding the reset for 5 secs only resets the the IP, again there is no browser interface. I can set IP using the wizard but it only sets the IP, FTP service doesn't seem startable. I am able to access the unit through Putty (so the SSH Daemon is working) I checked the share folders and they are where they should be. I am not sure what to do next to get this unit back up... Thanks in advanced,
|
|
|
Post by omega on Feb 16, 2007 5:05:19 GMT 7
Hi greybard, try to disable (not uninstall, just disable) the IMGDUP module befire you try to reboot the system, e.g. after starting the file system check feature.... I still experience the problem, that the IMGDUP module disturbs the shutdown/reboot process. After booting just enable the IMGDUP module again.... Andreas
|
|
|
Post by greybard on Feb 16, 2007 5:09:03 GMT 7
Forgive what is probably a dumb question... How do I disable the IMGDUP module outside of the web interface? Basically I all I have is putty session into the box with no other way of reaching it. Need a BKM on this! Steve
|
|
|
Post by omega on Feb 16, 2007 5:15:34 GMT 7
Sorry, I didn't realise that you don't have http access any more.... It is not so easy to disable a module on the command line (this inspires me or maybe someone else to write a little script which offers this... ).... But it would be enough to just stop the module with the command: /raid/data/module/IMGDUP/Shell/module.rc stop Btw. this command is available for all the modules..... The module.rc scripts normally accept the commands start, stop and status.... Andreas
|
|
|
Post by greybard on Feb 16, 2007 5:22:46 GMT 7
Hmm...keeps giving me a "command not found".
|
|
|
Post by greybard on Feb 16, 2007 5:23:46 GMT 7
Never mind, got it working.
|
|
|
Post by greybard on Feb 16, 2007 5:27:52 GMT 7
Well, got it to restart with a shutdown commend, Still no web interface. No Shares.
Should I try another reset or what now?
Thanks!
|
|
|
Post by omega on Feb 16, 2007 5:51:18 GMT 7
Hi greybard, I think we're talking about the same problems in two threads, so we should try to continue in just one of them.... or did I miss something Did you try what I proposed in the other thread? Andreas
|
|
|
Post by greybard on Feb 16, 2007 5:58:20 GMT 7
Ok, wasn't sure which thread this belonged in.
yes, rebooted and still have no HTTP, No Shares but the folders and data are there. Now what?
|
|
|
Post by omega on Feb 16, 2007 6:03:23 GMT 7
|
|