Post by MasterBlaster on Dec 7, 2006 7:00:22 GMT 7
Does anyone face the problem that the 3com WLAN USB adapter doesn't work? I especially bought this one due to its compatibility list appearance. It's a 3CRUSB10075 with the S/N: 0100/L9JQ62E66E2BE
My Thecus has firmware 1.00.03.
PnP was disabled before and I started with the adapter connected to one of the rear USB ports (after all I also tested the second rear and even the one front port) and powering on.
The boot sequence seems to run normally, but the adapter LEDs went out when the booting... message disappears, the one long beep at the end is missing and there is no access to the Thecus at all. The display shows at the end only the upper line, no rotating messages.
The only way out then is to switch off....
With my desktop computer and Windows XP the adapter works fine.
I hope anyone has an idea or explanation or experience to share.