|
Post by dbridges on Mar 18, 2007 5:38:20 GMT 7
I can use "siukee" login web GUI by https..... All accounts also cannot login to FTP server. There any method to fallback firmware to 2.1.03? Simply speaking you can't roll back the firmware. Have you tried varying the ftp settings. What do you get when you set it to allow anonymous downloads or anonymous uploads/downloads? You're only other option is to install SSH and get in and configure ftpd yourself.
|
|
oreos
Junior Member
Posts: 57
|
Post by oreos on Mar 18, 2007 14:12:57 GMT 7
Hi,
just installed the new FW. Since then SSH doesn't seem to be working. I did reset the pwd prior to reboot by disabling and enabling the ROOTPWD module but this didn't help.
I get always a connection refused error. Any ideas why this might happen?
|
|
|
Post by dbridges on Mar 18, 2007 16:30:08 GMT 7
With the latest SSH version the ROOTPWD module isn't required.
It's probably worth installing the latest SSH 3.0.01 and doing so may refresh everything and get it working.
|
|
oreos
Junior Member
Posts: 57
|
Post by oreos on Mar 18, 2007 17:02:54 GMT 7
Thanks for the tip,
I actually did have the last version but somehow the upgrade confused the settings. Anyway, I de-installed every module and redid the setup. Now everything works fine so it is great.
Cheers,
oreos
|
|
|
Post by siukee on Mar 18, 2007 20:27:59 GMT 7
I already try to set it to allow anonymous downloads or anonymous uploads/downloads, but same problem occured.
Can U tell me more detail about how to use ssh? Thanks....
|
|
|
Post by dbridges on Mar 19, 2007 4:22:42 GMT 7
|
|
|
Post by siukee on Mar 20, 2007 11:55:32 GMT 7
I already re-installed FW, but the problem still peresist. I use ssh login to N2100, but it requested me to enter password, I entered password , but failed with wrong password. Thecus support Only replied my e-mail Once...... never reply my e-mail again.....
|
|
|
Post by dbridges on Mar 20, 2007 15:38:29 GMT 7
I already re-installed FW, but the problem still peresist. I use ssh login to N2100, but it requested me to enter password, I entered password , but failed with wrong password. Thecus support Only replied my e-mail Once...... never reply my e-mail again..... All i can suggest now is that you loan it to a friend with linux skills and get them to look at it. The problem is probably something really simple for a linux guru to fix.
|
|
|
Post by rookie on Mar 21, 2007 2:36:17 GMT 7
|
|
|
Post by siukee on Mar 21, 2007 22:02:25 GMT 7
dbridges: Thanks for your help. ;D
I used ssh login to my n2100, and then changed /etc/version from 2.1.05 to 2.1.00. Therefore I can fallback to 2.1.03. The ftp problem vanished immediately.....
|
|
|
Post by gunny2k6 on Mar 22, 2007 1:21:04 GMT 7
right taken the plunge and upgraded to 2.1.0.5 from 2.1.0.1 with few modules installed and before i rebooted the NAS i told ssh to reset password and gone through all the settings checking / em and no problems to report
ALLS working well touch wood ;D
|
|
kaloz
New Member
Posts: 2
|
Post by kaloz on May 14, 2007 6:28:35 GMT 7
Could someone with 2.1.05 show me the output of "fis list" from RedBoot? I think something went wrong during update, and the device simply doesn't boot currently.
|
|
|
Post by dbridges on May 14, 2007 14:58:34 GMT 7
This isn't from 2.1.05 (it's from 2.1.03) but i dont expect it's changed. Certainly the firmware update process hasn't changed at all.
You're not the first to suffer firmware update issues.
Usually it's just the apache config being wiped. If it's auto configuring your disks then you have access to the samba config and you can just create a share to the full filesystem and edit what you want.
|
|
|
Post by oldsmobuick on May 19, 2007 4:30:57 GMT 7
i too can ftp in with good username and bad password!
|
|
|
Post by siukee on May 31, 2007 11:49:54 GMT 7
Hi, I changed sshd_config "PermitRootLogint" to "no", but how can I change back to "yes". Because I cannot login as root now.
|
|