|
Post by smytheit on Jul 12, 2006 22:07:10 GMT 7
I have two new N4100s (firmware rev 1.2.03) and 8 Hitachi Deskstar 7K400 series, 400gb HDs, Model: HDS724040KLSA80
The N4100s are not recognizing the drives and I can't have them exchanged at this point. I noticed in the HCL that a drive in the same series just a larger capacity is working so there must be some way to get these drives to work. Is there a work around to this issue? Are there any data sheets for the N4100 available ( hardware specific, e.g. chip-sets/manufacturer)?
Thanks, I haven't had any luck getting any support yet. Alex
|
|
|
Post by N2100Owner on Jul 13, 2006 9:24:16 GMT 7
www.thecus.com/download/other/N4100%20FAQ%202006-04-28.pdf 2-1. Hard disk drive compatibility N4100 could not recognize any hard disk drives with SSC (Spread Spectrum Clocking) enabled. So far we know some of Hitachi SATA 1.5G and Seagate Barracuda 7200.9 drives were shipped with SSC enabled by default. Moreover, it cannot be fixed by firmware upgrade. So please make sure SSC has been disabled before installing the drives in N4100.
I think you have to turn off SSC on your HDD.
|
|