Post by alanslingsby on Apr 8, 2010 0:43:50 GMT 7
I bought an N0204 as it was a best buy in UK MacUser.
Cannot get it to install on recent Apple 2.66 GHz Quad-Core or older 2x2.8Quad-Core.
Neither will it work with an old G5 I brought out of mothballs at the suggestion of Thecus support.
Seems to be unable to load firmware and/or udpr_flash.
Any ideas?
2010-04-07 18:29:39 app.open
2010-04-07 18:29:46 Press Next in Step0
2010-04-07 18:29:46 Detect with 81.150.234.28
2010-04-07 18:29:46 ControlSocket - Connected
2010-04-07 18:29:46 pass 102 error
2010-04-07 18:29:49 Press Next in Step1
2010-04-07 18:29:50 Press Next in Step2
2010-04-07 18:29:53 auto do_login in phase 2
2010-04-07 18:29:53 FTP get interface l81.150.234.28
2010-04-07 18:29:53 FTP1.Start udpr_flash
2010-04-07 18:29:54 main_setup.Upgrade_udpr_thread.Run
2010-04-07 18:29:54 USER ftp
2010-04-07 18:29:54 PASS ftp
2010-04-07 18:29:54 CWD /tmp
2010-04-07 18:29:54 TYPE I
2010-04-07 18:29:54 PORT 81,150,234,28,48,57
2010-04-07 18:29:54 STOR udpr
2010-04-07 18:30:33 App.close
2010-04-07 18:30:48 app.open
2010-04-07 18:33:10 Press Next in Step0
2010-04-07 18:33:10 Detect with 81.150.234.28
2010-04-07 18:33:10 ControlSocket - Connected
2010-04-07 18:33:10 pass 102 error
2010-04-07 18:33:14 Press Next in Step1
2010-04-07 18:33:15 Press Next in Step2
2010-04-07 18:33:18 auto do_login in phase 2
2010-04-07 18:33:18 FTP get interface l81.150.234.28
2010-04-07 18:33:18 FTP1.Start udpr_flash
2010-04-07 18:33:18 main_setup.Upgrade_udpr_thread.Run
2010-04-07 18:33:18 USER ftp
2010-04-07 18:33:18 PASS ftp
2010-04-07 18:33:18 CWD /tmp
2010-04-07 18:33:18 TYPE I
2010-04-07 18:33:19 PORT 81,150,234,28,48,57
2010-04-07 18:33:19 STOR udpr
2010-04-07 18:34:09 FTP errorConnection Timeout
2010-04-07 18:34:11 FTP_Fail
I see that someone else is having similar problems:
Hello,
I've just purchased a N2200.
I'm trying to set it up with smart utility (V 1.00.12).
After some LAN reconfiguration, I can see the N2200 on the first panel of the smart utility. N2200 has its default IP address (192.168.1.100).
Then, I click on the "System Installation Wizard" button and choose the 'manually installation'. After a few seconds, I get a pop up window telling me that a ftp connection timeout occurred.
So I'm unable to complete configuration for the N2200.
Here's the smart utility log file :
2010-01-02 19:11:00 app.open
2010-01-02 19:12:33 Press Next in Step0
2010-01-02 19:12:33 Detect with 192.168.1.2
2010-01-02 19:12:33 ControlSocket - Connected
2010-01-02 19:12:33 pass 102 error
2010-01-02 19:12:37 Press Next in Step1
2010-01-02 19:12:38 Press Next in Step2
2010-01-02 19:12:41 auto do_login in phase 2
2010-01-02 19:12:41 FTP get interface l192.168.1.2
2010-01-02 19:12:41 FTP1.Start udpr_flash
2010-01-02 19:12:41 main_setup.Upgrade_udpr_thread.Run
2010-01-02 19:13:31 FTP errorConnection Timeout
2010-01-02 19:34:33 FTP_Fail
2010-01-02 19:34:39 App.close
I didn't find any relevant issue in the knowledge database.
Does anybody can help me ?
Thank you
Cannot get it to install on recent Apple 2.66 GHz Quad-Core or older 2x2.8Quad-Core.
Neither will it work with an old G5 I brought out of mothballs at the suggestion of Thecus support.
Seems to be unable to load firmware and/or udpr_flash.
Any ideas?
2010-04-07 18:29:39 app.open
2010-04-07 18:29:46 Press Next in Step0
2010-04-07 18:29:46 Detect with 81.150.234.28
2010-04-07 18:29:46 ControlSocket - Connected
2010-04-07 18:29:46 pass 102 error
2010-04-07 18:29:49 Press Next in Step1
2010-04-07 18:29:50 Press Next in Step2
2010-04-07 18:29:53 auto do_login in phase 2
2010-04-07 18:29:53 FTP get interface l81.150.234.28
2010-04-07 18:29:53 FTP1.Start udpr_flash
2010-04-07 18:29:54 main_setup.Upgrade_udpr_thread.Run
2010-04-07 18:29:54 USER ftp
2010-04-07 18:29:54 PASS ftp
2010-04-07 18:29:54 CWD /tmp
2010-04-07 18:29:54 TYPE I
2010-04-07 18:29:54 PORT 81,150,234,28,48,57
2010-04-07 18:29:54 STOR udpr
2010-04-07 18:30:33 App.close
2010-04-07 18:30:48 app.open
2010-04-07 18:33:10 Press Next in Step0
2010-04-07 18:33:10 Detect with 81.150.234.28
2010-04-07 18:33:10 ControlSocket - Connected
2010-04-07 18:33:10 pass 102 error
2010-04-07 18:33:14 Press Next in Step1
2010-04-07 18:33:15 Press Next in Step2
2010-04-07 18:33:18 auto do_login in phase 2
2010-04-07 18:33:18 FTP get interface l81.150.234.28
2010-04-07 18:33:18 FTP1.Start udpr_flash
2010-04-07 18:33:18 main_setup.Upgrade_udpr_thread.Run
2010-04-07 18:33:18 USER ftp
2010-04-07 18:33:18 PASS ftp
2010-04-07 18:33:18 CWD /tmp
2010-04-07 18:33:18 TYPE I
2010-04-07 18:33:19 PORT 81,150,234,28,48,57
2010-04-07 18:33:19 STOR udpr
2010-04-07 18:34:09 FTP errorConnection Timeout
2010-04-07 18:34:11 FTP_Fail
I see that someone else is having similar problems:
Hello,
I've just purchased a N2200.
I'm trying to set it up with smart utility (V 1.00.12).
After some LAN reconfiguration, I can see the N2200 on the first panel of the smart utility. N2200 has its default IP address (192.168.1.100).
Then, I click on the "System Installation Wizard" button and choose the 'manually installation'. After a few seconds, I get a pop up window telling me that a ftp connection timeout occurred.
So I'm unable to complete configuration for the N2200.
Here's the smart utility log file :
2010-01-02 19:11:00 app.open
2010-01-02 19:12:33 Press Next in Step0
2010-01-02 19:12:33 Detect with 192.168.1.2
2010-01-02 19:12:33 ControlSocket - Connected
2010-01-02 19:12:33 pass 102 error
2010-01-02 19:12:37 Press Next in Step1
2010-01-02 19:12:38 Press Next in Step2
2010-01-02 19:12:41 auto do_login in phase 2
2010-01-02 19:12:41 FTP get interface l192.168.1.2
2010-01-02 19:12:41 FTP1.Start udpr_flash
2010-01-02 19:12:41 main_setup.Upgrade_udpr_thread.Run
2010-01-02 19:13:31 FTP errorConnection Timeout
2010-01-02 19:34:33 FTP_Fail
2010-01-02 19:34:39 App.close
I didn't find any relevant issue in the knowledge database.
Does anybody can help me ?
Thank you