dybuk
Junior Member
Posts: 63
|
Post by dybuk on Mar 27, 2010 8:18:26 GMT 7
Again not sure if anyone is interested but I knocked up a Transmission module (http://www.transmissionbt.com/). Yeah I know yet another web bittorrent client. Never did like MLDonkey's web interface. Anyway.... Install in the stardard way. - Extract the zip - Upload the .mod from the zip file via the web interface in modules. - Enable - Click "TRANSMISSION" from the modules page. - Click "Start Transmission" - Configure to your liking (look in the bottom right for menu options). It is quite likely you won't like my settings. I've set the default target dir to /raid/data/share/Transmission/dst. Feel free to change this via the gui. www.filehosting.org/file/details/127801/N5200_TRANSMISSION_00.00.01.zipor rapidshare.com/files/370449004/N5200_TRANSMISSION_00.00.01.zip.htmlAny problems give us a shout. Dybuk
|
|
|
Post by patmtp35 on Mar 30, 2010 15:08:08 GMT 7
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Mar 30, 2010 16:25:24 GMT 7
I haven't tried it but you should be able to connect with it. The web interface was good enough for my use.
If you do get any problems first thing to check would be the config file :
/raid/data/module/TRANSMISSION/system/etc/settings.json
Let me know how you get on.
Dybuk
|
|
|
Post by patmtp35 on Mar 30, 2010 18:15:48 GMT 7
thanks for your fast answer
the good thing your module seems to works on N0503 i could access to web interface
share folder for me is /raid/data/Transmission/dst i have open the port on my routeur load 1 .torrent but at this time nothing comes.
i'll test later remote client as soon as the module works great !
settings.json seems good
but nothings download
"alt-speed-down": 50, "alt-speed-enabled": false, "alt-speed-time-begin": 540, "alt-speed-time-day": 127, "alt-speed-time-enabled": false, "alt-speed-time-end": 1020, "alt-speed-up": 50, "bind-address-ipv4": "0.0.0.0", "bind-address-ipv6": "::", "blocklist-enabled": false, "dht-enabled": true, "download-dir": "\/raid\/data\/Transmission\/dst", "encryption": 1, "incomplete-dir": "\/raid\/data\/module\/TRANSMISSION\/system\/etc\/Incomple "incomplete-dir-enabled": false, "lazy-bitfield-enabled": true, "max-peers-global": 200, "message-level": 2, "open-file-limit": 32, "peer-limit-global": 240, "peer-limit-per-torrent": 60, "peer-port": 51413,
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Mar 30, 2010 19:21:34 GMT 7
What you could try is modifying the module.rc file and specifying a logfile.
In :
/raid/data/module/TRANSMISSION/shell/module.rc
Change :
/raid/data/module/$modName/system/bin/transmission-daemon -g /raid/data/module/$modName/system/etc
to
/raid/data/module/$modName/system/bin/transmission-daemon -g /raid/data/module/$modName/system/etc -e /raid/data/Transmission/transmission.log
then do
/raid/data/module/TRANSMISSION/shell/module.rc restart
....
The log file might give you more information.
Take it the web interface doesn't give you any errors?
Dybuk
|
|
|
Post by patmtp35 on Mar 31, 2010 14:41:07 GMT 7
hi!
after hours in testing all the things i think i have point a problem in my N0503 configuration because DLM2 azuerus mldonkey and transmission doesn't work , i was connected over the lan and not the WAN port so as it was late i'll configure my WAN port tonight.
i have a N2100 too and all works great ......
So as i saw you seems to be powerfull in making module please could you help me in making one for LLInk ?
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Mar 31, 2010 15:41:04 GMT 7
LLInk... Looks interesting. Might have a go at the weekend.
Dybuk
|
|
|
Post by patmtp35 on Mar 31, 2010 15:58:33 GMT 7
LLInk... Looks interesting. Might have a go at the weekend. Dybuk many thanks i use it on WNR3500L routeur by optware and it works great with yamj support but as routeur processor is a bit low hd movie can't be stream, but with the power of N0503 or N5200 it 'll be good.
|
|
|
Post by patmtp35 on Mar 31, 2010 18:19:11 GMT 7
One more time many thanks !!!!!!
TRansmission works great now !!!
i was stupid with my bad config......
Also TRansmissiont remote client works great !
Download at 400kb/s
i'll sharethis from N0503 people!
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Mar 31, 2010 20:10:48 GMT 7
If there was anything bad in the default config I put in the module let me know and I'll correct and post a new version.
Dybuk
|
|
|
Post by patmtp35 on Mar 31, 2010 21:18:13 GMT 7
If there was anything bad in the default config I put in the module let me know and I'll correct and post a new version. Dybuk hi there is nothing wrong all was good the only thing user have to know is if they use it on N0503 they have to create a plublic directory share :TRANSMISSION and config transmission to default directory : /raid/data/transmission regards
|
|
|
Post by bbiggie on Mar 31, 2010 23:24:27 GMT 7
I cannot seem to download the file. Could someone kinldy make an alternative download site like rapidshare or megaupload etc?
Thanks
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Apr 1, 2010 2:11:15 GMT 7
|
|
|
Post by bbiggie on Apr 1, 2010 21:14:25 GMT 7
Received it with much thanks.
|
|
krpt
New Member
Posts: 2
|
Post by krpt on Apr 1, 2010 23:04:36 GMT 7
Works great on my N4200 !! Thank you so much The only trouble i have is that my favorite private tracker doesn't support it yet, only 1.8.x version so far.. Do you think it's possible to only change the "transmission-daemon" by it's older version ? ( I'm on my way to install a debian for compiling from older sources.. )
|
|