|
Post by belledonnealtitude on Jan 4, 2010 20:55:08 GMT 7
Hello,
I've just purchased a N2200. I'm trying to set it up with smart utility (V 1.00.12).
After some LAN reconfiguration, I can see the N2200 on the first panel of the smart utility. N2200 has its default IP address (192.168.1.100).
Then, I click on the "System Installation Wizard" button and choose the 'manually installation'. After a few seconds, I get a pop up window telling me that a ftp connection timeout occurred.
So I'm unable to complete configuration for the N2200.
Here's the smart utility log file :
2010-01-02 19:11:00 app.open 2010-01-02 19:12:33 Press Next in Step0 2010-01-02 19:12:33 Detect with 192.168.1.2 2010-01-02 19:12:33 ControlSocket - Connected 2010-01-02 19:12:33 pass 102 error 2010-01-02 19:12:37 Press Next in Step1 2010-01-02 19:12:38 Press Next in Step2 2010-01-02 19:12:41 auto do_login in phase 2 2010-01-02 19:12:41 FTP get interface l192.168.1.2 2010-01-02 19:12:41 FTP1.Start udpr_flash 2010-01-02 19:12:41 main_setup.Upgrade_udpr_thread.Run 2010-01-02 19:13:31 FTP errorConnection Timeout 2010-01-02 19:34:33 FTP_Fail 2010-01-02 19:34:39 App.close
I didn't find any relevant issue in the knowledge database.
Does anybody can help me ?
Thank you
|
|
|
Post by richardfx on May 21, 2010 16:01:52 GMT 7
haha, this is an old post, but did you enable FTP in the Management Console on your N2200.
Also if your Thecus has an address of 192.168.1.100 why didn't you add that to your FTP program, rather than trying to log into 192.168.1.2 which would be your router.
Also it might be wise to create yourself a username on the Thecus, and use those details to add to your FTP program, and select correct login type etc.
|
|