|
|
Post by biglad on Nov 3, 2009 8:06:46 GMT 7
I don't know if these are at all possible but I would like these features:
1. Wake-on-LAN (WOL)
2. Hard discs to spin down when idle
3. A better BT client than DLM2
4. The ability to move files and folders via the web interface.
That's all for now until I can think of some more.
|
|
|
|
Post by kyleh0000 on Nov 4, 2009 5:41:19 GMT 7
I think the NAS can already spin down the disks i forget where it is in the config page but i know mine definetly spins down I would also like to see a WOL and the ability to move files from the web interface  as for the BT client I havent yet managed to get it to install all it does it just sit there waiting to be installed and an hour later its still sitting there did anyone else have any problems installing the client? and one last thing, how do i make a public folder read only access? im happy to make all my folders public if i can make them read only so people dont go deleting or moving things they shouldnt, do anyone know a wat of doing this? thanks |
|
|
|
Post by biglad on Nov 4, 2009 10:41:15 GMT 7
I have set my hard discs to spin down on the config page after 30 mins but they don't. I think it might depend on the model of hard disk. I am using 2 x 1TB WD Green Power. Maybe there is a jumper setting I need to use.
|
|
|
|
Post by kyleh0000 on Nov 4, 2009 12:35:56 GMT 7
I have set my hard discs to spin down on the config page after 30 mins but they don't. I think it might depend on the model of hard disk. I am using 2 x 1TB WD Green Power. Maybe there is a jumper setting I need to use. hmm ok i have the exact same HDD in mine and it seems to work great, are u sure nothing is accessing the HDD? i know i dont have any jumpers on my HDD at all |
|
|
|
Post by kyleh0000 on Nov 4, 2009 17:17:11 GMT 7
wow i know what u mean about the bt client its horrible i expected more something like this www.thecus.com/VideoTutorial_N3200_BT.phphopefully they update it to something similar soon, this was one of the main reason why i got this NAS anyway hopefully they will update it soon |
|
|
|
Post by kyleh0000 on Nov 5, 2009 10:31:21 GMT 7
I have set my hard discs to spin down on the config page after 30 mins but they don't. I think it might depend on the model of hard disk. I am using 2 x 1TB WD Green Power. Maybe there is a jumper setting I need to use. check out item number 23 under know limitations, this might be the cause of the HDD not spinning down hope it helps:) |
|
|
|
Post by biglad on Nov 6, 2009 18:29:57 GMT 7
Thanks Kyle I had seen those release notes. Hopefully it will be sorted with a future firmware release. Another thing, I cant get it to talk to my usb hard drive, but if I plug a usb stick in I can see the contents of it in the USBHDD folder. Can't figure it out.
|
|
|
|
Post by willynt on Nov 8, 2009 20:53:33 GMT 7
Hi guys, Be fore buying a N2200, I'd like to know if we can: - Extend a single disk partition to a RAID1 without loosing the data? - Extend a RAID1 partition with larger disks, without loosing the data? I can't find any info in the webiste  Thx William |
|
|
|
Post by biglad on Nov 9, 2009 15:19:51 GMT 7
Hi William
If I understand what you are trying to do, you have one disc with data already on it and you want to get another disc then put them both into the N2200 and mirror the drives using RAID1. Unfortunately you would wipe the data on the first drive. When you create a RAID no data is preserved. The only workaround as far as I can see is to copy all the data first on to a third hard drive then copy it hack to the N2200 once you have created the RAID.
|
|
