|
Post by weissenh on Oct 17, 2008 23:52:33 GMT 7
|
|
|
Post by eems01 on Oct 19, 2008 19:19:07 GMT 7
Installed fine. No problems yet.
|
|
|
Post by shinger on Oct 20, 2008 15:55:28 GMT 7
Have updated the firmware to 2.00.14 i dont have encountered any problems yet.
|
|
|
Post by netaddict on Oct 21, 2008 0:03:44 GMT 7
How about anyone with the Samsung Spinpoint F1 drives? I have the 750 GB ones - but don't want to risk losing my data. Have updated the firmware to 2.00.14 i dont have encountered any problems yet.
|
|
|
Post by shinger on Oct 21, 2008 7:08:47 GMT 7
How about anyone with the Samsung Spinpoint F1 drives? I have the 750 GB ones - but don't want to risk losing my data. Have updated the firmware to 2.00.14 i dont have encountered any problems yet. I use the Western Digital 1TB SATA300 16MB, WD1000FYPS RE2-GP 24x7. I have now 1 wd harddisk in the NAS but ordered another 4 to make raid 5 with the 4 harddisks. Ill post my exprience if something should happen with the firmware 2.00.14
|
|
tomb
New Member
Posts: 6
|
Post by tomb on Oct 22, 2008 1:22:39 GMT 7
How about anyone with the Samsung Spinpoint F1 drives? I have the 750 GB ones - but don't want to risk losing my data. Have updated the firmware to 2.00.14 i dont have encountered any problems yet. I also have the 750 GB Spoinpoints and still no working FW after 2.00.08. Which version do you run?
|
|
|
Post by spider on Oct 22, 2008 9:01:09 GMT 7
I've upgraded my N5200 Pro from 2.00.10 to 2.00.14 about ten hours ago. I'm running five 1TB Hitachi drives.
Upgrade went without any problem.
Will notify if any issue will surface.
|
|
|
Post by netaddict on Oct 22, 2008 15:27:02 GMT 7
I've been lucky, I run 2.00.09.1 (beta) without any problems, and I didn't have problems with 2.0.0.08 either. I almost went to 2.0.0.12 - but whew... lucky I waited.
|
|
|
Post by tankslappa on Oct 23, 2008 8:57:56 GMT 7
How about anyone with the Samsung Spinpoint F1 drives? I have the 750 GB ones - but don't want to risk losing my data. I also have the 750 GB Spoinpoints and still no working FW after 2.00.08. Which version do you run? I have 5 1TB spinpoint drives, I'm running N5200PRO V2.00.11.2 (There were posts and links to it in this forum) It works fine, and I'm going to sit back and see what happens with .14... Saw enough screaming and panicing with .12 so didn't go there, next thing I know we've gone through .13 and now we're onto .14... I'll wait... It ain't broke, so I'm not gonna fix it!
|
|
|
Post by pietro on Oct 26, 2008 14:59:30 GMT 7
i still had massive troubles with 2.00.14 and my samsung 1tb drives - so stay at your working fw !
after testing this again my frustrating level was so high that i switched to openfiler - a pc-based nas system with even more features and more speed.
now i am fine....(except the power-consumption).
pietro
|
|
|
Post by tankslappa on Oct 27, 2008 11:56:35 GMT 7
Hmmm, interesting, what the raid support like with openfiler?
I wonder if it's possible to install it onto the Thecus hardware, with a bigger flash drive. I wonder what the performance would be like.
|
|
|
Post by shinger on Oct 30, 2008 10:12:33 GMT 7
Could somebody check if there Media server still works..
Because sinds 2.00.14 i got some issues that it works until a few minute i lose connection to the media server on my NAS
My mediacenter is my Playstion 3
Im not sure if this problem accures with 2.00.14 because i just set up 4 WD harddisks in to raid 5 but still that wouldnt give this problem i guess.
|
|
|
Post by bendelongis on Oct 30, 2008 10:16:27 GMT 7
I'm having a lot of problems with the new 2.00.14 firmware I have just upgraded my N5200 from 2.00.10 to 2.00.14 to try and resolve some issues with media playback. Now using the new firmware the audio playback is choppy and I can no longer watch movies directly from my N5200
|
|
|
Post by georg54 on Nov 16, 2008 4:25:18 GMT 7
No problem with the new 2.00.14 firmware!
|
|
|
Post by sh0dan on Nov 19, 2008 16:49:23 GMT 7
Upgraded from 2.00.01 without a problem.
3x1GB WD Green drives, RAID 5. 2x500MB WD RE2 YS, RAID 0, iSCSI target.
Only using SMB & iSCSI for access.
Modules:
|
|