|
Post by vk4akp on Apr 13, 2010 21:06:01 GMT 7
Hi, I have this same drive and can not get the N1200 to see it in time at boot up. [ Thecus N1200 & ST31000528AS (Seagate 1TB). ] My N1200 doesn't see the drive power up in time yet the Blue HDD light comes on. I have tried the 1.5mbit jumper. It did nothing. :( shazam.zapto.org/thecus/Thecus-N1200-console-boot.txtfor a full log of the console boot sequence. -- sata_sil(0000:00:10.0): cache line size not set. Driver may not function sata_silApplying R_ERR on DMA activate FIS errata fix ata1: SATA max UDMA/100 cmd 0xC9050E80 ctl 0xC9050E8A bmdma 0xC9050E00 irq 20 ata2: SATA max UDMA/100 cmd 0xC9050EC0 ctl 0xC9050ECA bmdma 0xC9050E08 irq 20 ata1 is slow to respond, please be patient ata1 failed to respond (30 secs) scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil -- Feel free to contact me if you have any ideas please. .-.-. Seagate Barracuda 7200.12 ST31000528AS 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive Series Barracuda 7200.12 Model ST31000528AS newegg.com $89
|
|
|
Post by vk4akp on Aug 9, 2010 13:20:38 GMT 7
OK, I've now got another drive to try. This one is a Seagate ST3320613AS (320Gig). I get exactly the same problem. The Setup Utility formats through to 100% and then says format failure. Yet it makes it to 100% !!! After this the Setup Utility can not see the N1200. However the web browser can bring up the "please use the setup utility" URL from the device. Any idea's? I'm really starting to hate this thing!. .-.-.
|
|