|
Post by grumpftl on Jan 6, 2008 1:36:18 GMT 7
Hello to everybody! I`m using FW 2.00.04 with 2 HDD in Raid1 on a 5200pro. After several days the internal display freezes. Normally it cycles through several messages, but after some days it stays on one message (randomly) and does not cycle. Also the buttons under the Display does not work then. Anybody else?
Thanks, Grumpftl
|
|
|
Post by grumpftl on Feb 4, 2008 4:25:23 GMT 7
Some funny things are going on... Sometimes after just 24h the display starts to behave like mentioned above. But it seems as if the display is still updated, but with hours (!!) between, because I can some changes. But it*s not good to see e.g. the date/time page showing a time 5h behind ...
Nobody else?
|
|
|
Post by durango on Apr 15, 2008 14:26:09 GMT 7
grumpftl, Yes I have the same issue, it freezees after few days and only way to restore back is to powere off and on. Dangerous. Do you still have issues? Tx, Durango
|
|
|
Post by grumpftl on Apr 16, 2008 22:05:27 GMT 7
Yes, the Issue is still there. After one patch Thecus replied that I should change the DOM (that means, bring it back to the dealer for that). But I need it so it's still unchanged. I found out that the display moves on after some hours and freezes again. The Ticketnumber was the: HMU-33447-107
Yours Grumpftl
|
|