kylui
New Member
Posts: 6
|
Post by kylui on Nov 17, 2006 16:40:30 GMT 7
|
|
jamis
Full Member
Posts: 109
|
Post by jamis on Nov 17, 2006 22:35:45 GMT 7
Sounds like power management may be working in this version... I'll give it a try tonight.
|
|
|
Post by grizzlybear on Nov 17, 2006 23:27:51 GMT 7
I can't install this on top of the 1.00.04.3 beta firmware - I'm assuming it's not seen as a newer version. Worked with a re-download of the firmware image.
|
|
|
Post by turtlesoup on Nov 18, 2006 0:58:01 GMT 7
Just upgraded from 1.00.4.9
So far so good. The front display cycles much faster. Disk power management is in there but I'm going to see if my reboot problem is fixed before testing the disk management.
|
|
|
Post by mjohns64 on Nov 18, 2006 19:15:19 GMT 7
Just pulled my new 5200 straight out of the box. Had shipped with the 1.00.03 firmware - just uploaded 1.00.04 as first action before building RAID. Halted at 22% on first attempt, but gave good error screen notification. Second upload worked fine. Uptime of just over an hour now.... 368 minutes left on the build of the Array.. :-( But at least the firmware update went smoothly and I have not had any of the problems spoken about on the forum previously. Cheers, M.
|
|