dybuk
Junior Member
Posts: 63
|
Post by dybuk on Mar 15, 2010 2:35:49 GMT 7
I'm not sure if anybody is interested but I compiled nzbget (http://nzbget.sourceforge.net/Main_Page) for the N5200. Thought I'd create a module incase anybody else was interested and included nzbget-webinterface. Only fair since I've used several of the modules from other people. Here is a link : [THERE IS A 00.00.02 VERSION NOW. PLEASE READ DOWN THE THREAD]rapidshare.com/files/373187795/N5200_NZBGET_00.00.01.zipModule is like most others... extract the zip and load the mod file through the gui. When enabled it is set to use the following dir for downloads : /raid/data/share/Nzbbin If it can't create that dir it will fail to start. This dir can be changed and the server started via the web interface : http://<Server Name>/modules/NZBGET/www/index.php Or launch from the modules page click NZBGET... Then Start NZBGET. All the configuration is available on the web interface including adding news servers etc. Like all instances of nzbbin once configured any .nzb files dumped in /raid/data/share/Nzbbin/nzb will automatically be downloaded, any parring needed to be done will be carried out and auto unrar'ing will take place. Dybuk.
|
|
|
Post by mecallie on Mar 18, 2010 4:29:15 GMT 7
For some reason I could never get the sabnzbd+ module to work on my N4100Pro. But this one seems to be working for now, did not put in the servers yet, but webpage is showing. Thanks for compiling it!
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Mar 18, 2010 5:45:16 GMT 7
I've only been using NZBGET for a week and I'm really impressived with it. Really simple and fast. I was tempted to include a compiled version of axel ( freshmeat.net/projects/axel/ ) in the module as well but chose to leave it out to keep it to the point. axel for me downloads from http addresses about 5 times faster than MLDonkey on the N5200. Shame it doesn't support https and a nice pretty web interface If you get any problems with the module, let me know. Dybuk
|
|
|
Post by filmman on Apr 5, 2010 17:30:18 GMT 7
have tryed to get this to work but not had any luch so far idex page loads can set files to download but nothing happends any idears
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Apr 5, 2010 21:03:40 GMT 7
Well first check that the web interface is connecting to daemon (i.e. no could not connect to nzbget on the web page).
Then check the config. Remember my download directory might not be what you'd want.
Remember that for every config change of NZBGET you need to bounce the daemon. (Control Panel -> shutdown, refresh a few times then startup).
Also remember the web interface has a different config file to the daemon and both must match up (i.e. your base dir, if you've don't like mine).
If all is not well after that try looking at the log file. This should be in your target dir + dst.
Hope this helps,
Dybuk
|
|
dgm
New Member
Posts: 16
|
Post by dgm on Apr 5, 2010 23:00:38 GMT 7
Thanks will give it a go.
Got to the webpage, but nzbin was not created, done it manually.
Now to have a play.
Doug
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Apr 8, 2010 3:33:52 GMT 7
I added a copy of leechr (http://code.google.com/p/leechr/) to my build of NZBGET.
This obviously depends on the python module being installed.
Worth releasing a new version with this included? Or better to keep it pure NZBGET and leave people to use what ever they want?
Thoughts?
Saying that though nobody has confirmed this module as actually working for them.
Dybuk
|
|
dgm
New Member
Posts: 16
|
Post by dgm on Apr 8, 2010 23:19:09 GMT 7
Sorry, didn't get back. I now have two nzbbin folders: - ...\data\nzb
- ...\data\share\nzb
I created the 2nd one... The nzb put in the folder didn't disappear and nothing was downloaded. The web i/f just kept saying the server was sleeping and reset the second count when refreshed. nzb loaded using browse were invisible, but when winscp was used I could see that the nzbs had been uploaded. neither download folder has any downloads
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Apr 8, 2010 23:47:31 GMT 7
How/Why do you have two nzb folders?
Nzbget supports one and searches in subfolders.
You may need to post your config files (removing your news servers ofc or blanking username/password).
If all else fails you could :
- Uninstall the module - rm -rf /raid/data/module/backup/NZBGET - mkdir -p /raid/data/share/Nzbbin/dst - mkdir -p /raid/data/share/Nzbbin/nzb - mkdir -p /raid/data/share/Nzbbin/queue - mkdir -p /raid/data/share/Nzbbin/tmp - Reinstall the module - Configure your news server via the gui - /raid/data/module/NZBGET/shell/module.rc stop - /raid/data/module/NZBGET/shell/module.rc start - Drop an nzb file into /raid/data/share/Nzbbin/nzb - Click scan on the web page - Click refresh on the web page.
Dybuk
|
|
|
Post by firefoxy on Apr 11, 2010 5:42:37 GMT 7
Hi dybuk,
I tried to get your new module running but I fail to do more than that.
The install worked well, all directories are created. I put a NZB file in the share/Nzbbin and share/Nzbbin/nzb folder but nothing happens.
The only configuration I changed was the NZB Server settings. saved. restarted. Rest ist out of the box.
Server message: Sun, 11 Apr 2010 00:35:59 +0200 nzbget 0. 7. 0- testing- r380 daemon- mode
Any advice what to do ? P.S.: One thing I´d like to mention is for windows users the new directories /share/.. aren´t visible and they are chmod 755 so no write access.
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Apr 11, 2010 17:31:53 GMT 7
Looking at the 00.00.01 config it looks as though the web interface is set to upload to the wrong dir. /raid/data/share/Nzbbin rather than /raid/data/share/Nzbbin/nzb. But that shouldn't stop it from working if you manually drop the file in the nzb dir. You can try my latest version if you like : rapidshare.com/files/374583558/N5200_NZBGET_00.00.02.zipInstallation notes : If you have the old version installed - uninstall old module. - run the following from a command prompt rm -rf /raid/data/module/backup/NZBGET (this removes all the old settings) Installation: - install the new module - enable the module - click NZBGET - click start NZBGET - click config - click news servers - Enter your news server details - Click save changes - Click "back to main page" - Click shutdown (select Ok) - Click refresh - Click "start" - Browse to an nzb file - Click Submit file. - Stuff should start happening. ===================================== Changes: - Work dir has been changed to /raid/module/NZBGET. This will be created on install along with the dst, nzb, queue, tmp sub directories. - The web gui upload should match the correct dir now - Leechr has been included in this distribution (http://code.google.com/p/leechr/). To get this working : = Create a www.myepisodes.com account. Add some shows, mark the episodes you have already. Don't panic its free and I'm pretty sure it doesn't even do an email check. = Install the Python Module. = Add the following scheduled task to nzbget : Task1.Time=06:00,08:00,10:00,12:00,14:00,16:00,18:00,20:00,22:00 Task1.WeekDays=1-7 Task1.Command=Process Task1.DownloadRate=100 Task1.Process=/raid/data/module/PYTHON/python/bin/python /raid/data/module/NZBGET/system/leechr/main.py conf=/raid/data/module/NZBGET/system/etc/leechr.conf debug (Feel free to change the times/weekdays etc.) = Modify the file /raid/data/module/NZBGET/system/etc/leechr.conf # Your MyEpisodes.com Username ME_USERNAME = "" # Your MyEpisodes.com Password ME_PASSWORD = "" (Add your myepisodes username password) = Restart the nzbget daemon. It should now check for new episodes every 2 hours. Any problems let me know, Dybuk
|
|
dgm
New Member
Posts: 16
|
Post by dgm on Apr 11, 2010 18:00:09 GMT 7
Hi
I'm Running Windows.
Uninstalled and manually removed nzbbin folders. Reinstalled:
Folders were created when installed - /raid/data/share/Nzbbin - /raid/data/share/Nzbbin/dst - /raid/data/share/Nzbbin/nzb - /raid/data/share/Nzbbin/queue - /raid/data/share/Nzbbin/tmp
They are not visible from windows explorer. They are 0755, I changed them to 0777
Configure 2 news servers, stopped started server.
Uploaded nzb file and it was put in - /raid/data/share/Nzbbin
It was ignored...
I copied it into - /raid/data/share/Nzbbin/nzb
I looked at the Web GUI and saw that 'files for download was populated and files ARE being downloaded as can be seen using WinSCP or Putty.
So how to get Windows Explorer to see the folder(s)
|
|
dgm
New Member
Posts: 16
|
Post by dgm on Apr 11, 2010 18:15:01 GMT 7
Sorted having to move the nzb into the sub-folder.
Changed the nzbdir path by adding '/nzb'
Now uploading an nzb file works fine :-)
Now only problem is getting Windows Explorer to see the folders rather than having to use WinSCP
thanks
|
|
dybuk
Junior Member
Posts: 63
|
Post by dybuk on Apr 11, 2010 18:29:53 GMT 7
You could try changing the daemons umask to 0000 in the config and bounce. I'm an ubuntu user so probably don't see these issues. But let me know the changes and I'll try and include in the module.
|
|
dgm
New Member
Posts: 16
|
Post by dgm on Apr 11, 2010 19:59:12 GMT 7
Ok
Here's what I think I did (?)
using the N5200 GUI, I created:
'nzbin' with permissions set to hide and not public and changes the ACL to add myself.
I created* the folder structure at:
- dst - nzb - queue - tmp
* This is where I went wrong because I was the owner
I changed:
$MAINDIR = /raid/data/share/Nzbbin NzbDir = /raid/data/share/Nzbbin/nzb
to:
$MAINDIR = /raid/data/nzbbin NzbDir = /raid/data/nzbbin/nzb
Now the hacking started, changed the owner and permissions to root
And it now seems to work.
I think the main problem was putting the folder inside 'Share'.
|
|